Next-in-Thread Next Message

Ok BIOS was not providing PCI interrupt information 

Forum: PCMCIA Installation and Configuration Issues
Re: Question Compaq Laptop M700 hangs when card is inserted or ejected (Atanu Ghosh)
Date: 2000, May 01
From: David Hinds <dhinds@pcmcia.sourceforge.org>

This system's BIOS was not providing a complete PCI interrupt routing table, so the PCI drivers were not able to deduce the PCI interrupt assignment for the CardBus bridge. The bridge was still generating PCI interrupts, which locked up the system, because another device shared the same interrupt line, but that device's driver was unable to clear the CardBus bridge interrupt.

The problem was solved by explicitly telling the i82365 module the PCI interrupt assignment, with a startup option of:

  PCIC_OPTS="pci_irq_list=11,11"

(in this case, the bridge was configured for PCI irq 11)

-- Dave

Next-in-Thread Next Message

Add Message to: "BIOS was not providing PCI interrupt information"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10