Next-in-Thread Next Message

More cardctl can see something.... 

Forum: PCMCIA Installation and Configuration Issues
Re: Question PCMCIA not working with a TI 1450 PCI-Cardbus (Paul Hayton)
Re: None Probably not a memory window issue (David Hinds)
Date: 2000, May 11
From: Paul Hayton <pmh@robots.ox.ac.uk>

Thanks for replying. cardctl reports the following :

#cardctl status
Socket 0:
  5V 16-bit PC Card
  function 0: [ready]
Socket 1:
  no card

I get exactly the same results with a D-Link DE-660 Ethernet PCMCIA card, and the same results if I start PCMCIA without the card in, then insert the card afterwards.

Just for comparison, the message log from another machine (same manufacturer, before they went and changed all their chipsets - this was a Cirrus PD6710 ISA-to-PCMCIA controller) reports the card as :

May 10 09:21:55 scarus cardmgr[282]: initializing socket 0
May 10 09:21:55 scarus cardmgr[282]: socket 0: ATA/IDE Fixed Disk
May 10 09:21:55 scarus cardmgr[282]: initializing socket 0
May 10 09:21:55 scarus cardmgr[282]: socket 0: ATA/IDE Fixed Disk
May 10 09:21:55 scarus cardmgr[282]: executing: 'insmod /lib/modules/2.2.5/pcmcia/ide_cs.o'
May 10 09:21:58 scarus kernel: hde: Calluna Technology CT1040RM, ATA DISK drive
May 10 09:21:58 scarus kernel: ide2 at 0x100-0x107,0x10e on irq 3
May 10 09:21:58 scarus kernel: hde: Calluna Technology CT1040RM, 992MB
w/128kB Cache, CHS=2016/16/63
May 10 09:21:58 scarus kernel:  hde: [PTBL] [1008/32/63] hde1
May 10 09:21:58 scarus kernel: ide_cs: hde: Vcc = 5.0, Vpp = 0.0
May 10 09:21:58 scarus cardmgr[282]: executing: './ide start hde'
May 10 09:21:58 scarus cardmgr[282]: + sh: ./ide: No such file or directory
May 10 09:21:58 scarus cardmgr[282]: start cmd exited with status 126 and cardctl (from card services 3.0.9 reports)

#cardctl status
Socket 0:
  5V 16-bit card present
  Function 0: ready, battery dead, battery low

Any ideas how to proceed in debugging ? I'm quite happy fiddling with the source if neccessary.

Regards

Paul

Next-in-Thread Next Message

Select this message: cardctl can see something....

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]