[ Next-in-Thread ]  [ Next Message ] 

Question: Using PCMCIA with Kernel v2.3.99-pre6 

Forum: Installing Linux using or onto a PCMCIA device
Date: 2000, May 03
From: David Stephenson stugs

I am installing the PCMCIA modules on my Toshiba Portege 3020CT. After my inital install of Debian, it found my network and modem cards. Since it was supported, I decided to upgrade to a 2.3.x kernel. I installed the kernel and then installed the latest PCMCIA package. When I boot the machine I get the following: 

<snip>
Linux PCMCIA Card Services 3.1.11
  kernel build: 2.3.99-pre6 #8 Wed May 3 14:50:31 EST 2000
  options:  [pci] [cardbus]
Intel PCIC Probe: not found
ds: no socket drivers loaded!
<snip>

Once I get to the login promt and check the modules, I see that only the pcmcia_core module is loaded. I am then unable to load any of the other modules by hand.

If I reboot back into a 2.2.x kernel, the modules all load fine.

Any ideas?

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 2 ]  [ 3 ]  [ All ] 

1. Socket driver selection issue by David Hinds, 2000, May 03
2. Feedback: How to find not recognized Xircom-Card! by Juergen Rose, 2000, Jul 23

[ Add Message ]  to: "Using PCMCIA with Kernel v2.3.99-pre6"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]