[ Next-in-Thread ]  [ Next Message ] 

Socket driver selection issue 

Forum: Installing Linux using or onto a PCMCIA device
Re: Question: Using PCMCIA with Kernel v2.3.99-pre6 (David Stephenson)
Date: 2000, May 03
From: David Hinds <dhinds@pcmcia.sourceforge.org> 

In the 2.3.* kernel, the i82365 driver module only supports ISA bus
PCMCIA bridges.  You need to disable that, and enable the CardBus
socket driver.  Instead of loading the i82365 module, you'll need to
load the yenta and pci_socket modules.

-- Dave

[ Next-in-Thread ]  [ Next Message ] 

[ Add Message ]  to: "Socket driver selection issue"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]