[ Next-in-Thread ]  [ Next Message ] 

Socket driver selection issue 

Forum: Installing Linux using or onto a PCMCIA device
Re: Question: Using PCMCIA with Kernel v2.3.99-pre6 (David Stephenson)
Date: 2000, May 03
From: David Hinds <dhinds@pcmcia.sourceforge.org> 

In the 2.3.* kernel, the i82365 driver module only supports ISA bus
PCMCIA bridges.  You need to disable that, and enable the CardBus
socket driver.  Instead of loading the i82365 module, you'll need to
load the yenta and pci_socket modules.

-- Dave

[ Next-in-Thread ]  [ Next Message ] 

Select this message: Socket driver selection issue

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]