[ Next-in-Thread ]  [ Next Message ] 

Question: Bug: Lockups on card insertion/removal... 

Forum: Installing Linux using or onto a PCMCIA device
Date: 2000, Aug 03
From: Elliot Lee sopwith 

Hardware: Casio Fiva MPC-501

Software: kernel-2.2.16-17, pcmcia-cs-3.1.19 (from Red Hat pinstripe beta).

Symptoms: When I remove or insert cards, the system locks up hard. I did manage to remove a 3c589 network card, but inserting it, or inserting/removing a WaveLAN/IEEE card or CD-ROM interface card, causes the described lockup.

I saw a problem report in another thread that said having a syslog such as the following was a Bad Thing(tm):
Aug  2 21:16:21 anode kernel: Linux PCMCIA Card Services 3.1.19
Aug  2 21:16:21 anode kernel:   kernel build: 2.2.16-17 #1 Wed Jul 26 15:04:58 EDT 2000
Aug  2 21:16:21 anode kernel:   options:  [pci] [cardbus] [apm]
Aug  2 21:16:21 anode kernel: PCI routing table version 1.0 at 0xfdfa0
Aug  2 21:16:21 anode kernel:   unknown PCI interrupt router 1078:0001
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Aug  2 21:16:21 anode kernel: Intel PCIC probe: 
Aug  2 21:16:21 anode kernel:   Ricoh RL5C475 rev 00 PCI-to-CardBus at slot 00:01, mem 0x68000000
Aug  2 21:16:21 anode kernel:     host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [no pci irq] [lat 168/176] [bus 32/34]
Aug  2 21:16:21 anode kernel:     ISA irqs (default) = 3,4,7,9,10,11,12 polling interval = 1000 ms
Aug  2 21:16:22 anode pcmcia:  cardmgr.

Please let me know what details I can provide to help narrow down the problem...

[ Next-in-Thread ]  [ Next Message ] 

Select this message: Bug: Lockups on card insertion/removal...

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. More information? by David Hinds, 2000, Aug 03
(_ More Fiva info by Elliot Lee, 2000, Aug 03
(_ Ok: Resolved by Elliot Lee, 2000, Aug 03

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]