[ Next-in-Thread ]  [ Next Message ] 

More Fiva info 

Forum: Installing Linux using or onto a PCMCIA device
Re: Question: Bug: Lockups on card insertion/removal... (Elliot Lee)
Re: More information? (David Hinds)
Date: 2000, Aug 03
From: Elliot Lee sopwith

Output of lspci -v:
00:00.0 Host bridge: Cyrix Corporation PCI Master
	Flags: bus master, medium devsel, latency 0

00:01.0 CardBus bridge: Ricoh Co Ltd RL5c475
	Flags: bus master, medium devsel, latency 168
	Memory at <ignored> (32-bit, non-prefetchable)
	Bus: primary=00, secondary=20, subordinate=22, sec-latency=176
	I/O window 0: 00000000-00000003
	I/O window 1: 00000000-00000003
	16-bit legacy interface ports at 0001

00:12.0 ISA bridge: Cyrix Corporation 5520 [Cognac]
	Flags: bus master, medium devsel, latency 0
	I/O ports at 3000
	I/O ports at 4000
	I/O ports at 5000
	Memory at 40010000 (32-bit, non-prefetchable)

00:13.0 USB Controller: Compaq Computer Corporation USB Open Host Controller (rev 04) (prog-if 10 [OHCI])
	Subsystem: Compaq Computer Corporation USB Open Host Controller
	Flags: bus master, medium devsel, latency 64, IRQ 15
	Memory at e0000000 (32-bit, non-prefetchable)

dump_pirq output:
Interrupt routing table found at address 0xfdfa0:
  Version 1.0, size 0x0030
  Interrupt router is device 00:00.0
  PCI exclusive interrupt mask: 0x8000

Device 00:01.0 (slot 1):
  INTA: link 0x01, irq mask 0xdeb8
  INTB: link 0x02, irq mask 0xdeb8
  INTC: link 0x03, irq mask 0xdeb8
  INTD: link 0x04, irq mask 0xdeb8

Interrupt router at 00:00.0: unknown vendor 0x1078 device 0x0001

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 2 ]  [ 3 ]  [ All ] 

1. Ok: Resolved by Elliot Lee, 2000, Aug 03

[ Add Message ]  to: "More Fiva info"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]