[ Next-in-Thread ]  [ Next Message ] 

More: perhaps an answer?! 

Forum: Installing Linux using or onto a PCMCIA device
Re: Question: linux-2.4.0-test6, Xircom and i82365 (Juergen Rose)
Date: 2000, Aug 16
From: Juergen Rose jrrose

Reading the thread "Bug: Lockups on card insertion/removal..." I ask me, if the same recipe could help. 

cat /proc/pci gives (lspci does not work on my laptop):
...
Bus  0, device   4, function  0:
  CardBus bridge: Texas Instruments PCI1225 (rev 1).
    IRQ 11.
    Master Capable.  Latency=168.  Max Lat=4.
    Non-prefetchable 32 bit memory at 0x10000000 [0x10000fff].
Bus  0, device   4, function  1:
  CardBus bridge: Texas Instruments PCI1225 (#2) (rev 1).
    IRQ 11.
    Master Capable.  Latency=168.  Min Gnt=192.Max Lat=7.
    Non-prefetchable 32 bit memory at 0x10001000 [0x10001fff].
...
Bus  0, device   7, function  2:
  USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 1).
    IRQ 5.
    Master Capable.  Latency=64.  
    I/O at 0x1060 [0x107f].
...
Bus  0, device   8, function  0:
  Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 16).
    IRQ 5.
    Master Capable.  Latency=64.  Min Gnt=2.Max Lat=24.
    I/O at 0x1400 [0x14ff].

dump_pirq output:
Interrupt routing table found at address 0xfdf50:
  Version 1.0, size 0x0090
  Interrupt router is device 00:07.0
  PCI exclusive interrupt mask: 0x0000
  Compatible router: vendor 0x8086 device 0x122e

Device 00:07.0 (slot 0):
  INTD: link 0x63, irq mask 0x0020

Device 00:04.0 (slot 0):
  INTA: link 0x60, irq mask 0x0800
  INTB: link 0x61, irq mask 0x0800

Device 00:08.0 (slot 0):
  INTA: link 0x63, irq mask 0x0020

Device 00:10.0 (slot 0):
  INTA: link 0x63, irq mask 0x0020
  INTB: link 0x61, irq mask 0x0800

Device 00:0d.0 (slot 0):
  INTA: link 0x61, irq mask 0x0800
  INTB: link 0x63, irq mask 0x0020

Device 00:01.0 (slot 0):
  INTA: link 0x60, irq mask 0x0800

Device 01:00.0 (slot 0):
  INTA: link 0x60, irq mask 0x0800

Interrupt router at 00:07.0: Intel 82371AB PIIX4/PIIX4E PCI-to-ISA bridge
  PIRQ1 (link 0x60): irq 11
  PIRQ2 (link 0x61): unrouted
  PIRQ3 (link 0x62): unrouted
  PIRQ4 (link 0x63): irq 5
  Serial IRQ: [enabled] [continuous] [frame=21] [pulse=4]

So it seems me that irq=5 is at the place of irq=15 at the former thread. That's why I set
	PCIC_OPTS="poll_interval=100 pci_irq_list=5"
in /etc/rc.d/rc.pcmcia and now my card is recognized.

	Juergen

[ Next-in-Thread ]  [ Next Message ] 

Select this message: perhaps an answer?!

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]