Feedback: More problems with KXL-D740 PCMCIA CDROM 

Forum: Installing Linux using or onto a PCMCIA device
Date: 1999, Dec 12
From: Bruce Forsberg <forsberg@adnc.com>

I was never able to install from the CDROM described in the previous message. I went ahead and installed from a DOS partition. I built a kernel (2.2.10) and download the 3.1.6 PCMCIA software. It recognizes the controller fine. But when I insert the card aftter about 5-10 seconds the system will hang. Below is the output from the /var/log/ messages file: It looks like the driver is crashing or something. Sorry for the length of this debug message. Thanks for your time, Bruce Forsberg Dec 11 23:09:00 portable /usr/sbin/cron[165]: (CRON) STARTUP (fork ok) Dec 11 23:09:15 portable login: pam_unix session started for user root, service login Dec 11 23:09:27 portable kernel: Sound error: Couldn't allocate DMA buffer Dec 11 23:16:21 portable cardmgr[68]: exiting Dec 11 23:16:21 portable kernel: unloading PCMCIA Card Services Dec 11 23:16:27 portable kernel: Linux PCMCIA Card Services 3.1.6 Dec 11 23:16:27 portable kernel: kernel build: 2.2.10 #2 Sat Dec 11 23:00:10 PST 1999 Dec 11 23:16:27 portable kernel: options: [pci] [cardbus] Dec 11 23:16:27 portable kernel: Intel PCIC probe: Dec 11 23:16:27 portable kernel: Ricoh RL5C475 PCI-to-CardBus at bus 0 slot 10, mem 0x68000000, 1 socket Dec 11 23:16:27 portable kernel: host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [no pci irq] [lat 168/176] [bus 32/34] Dec 11 23:16:27 portable kernel: ISA irqs (default) = 3,4,7,10,11,15 polling interval = 1000 ms Dec 11 23:16:27 portable cardmgr[1020]: starting, version is 3.1.6 Dec 11 23:16:27 portable cardmgr[1020]: watching 1 sockets Dec 11 23:16:27 portable kernel: cs: IO port probe 0x1000-0x17ff: clean. Dec 11 23:16:27 portable kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x140-0x147 0x170-0x177 0x370-0x37f 0x388-0x38f 0x4d0-0x4d7 Dec 11 23:16:27 portable kernel: cs: IO port probe 0x0a00-0x0aff: clean. Dec 11 23:18:37 portable kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. Dec 11 23:18:37 portable cardmgr[1020]: initializing socket 0 Dec 11 23:18:37 portable cardmgr[1020]: socket 0: Raven CD-Note SCSI Dec 11 23:18:37 portable cardmgr[1020]: executing: 'insmod /lib/modules/2.2.10/pcmcia/qlogic_cs.o' Dec 11 23:18:37 portable kernel: Ql: Using preset base address of 230 Dec 11 23:18:37 portable kernel: Ql: Using preset IRQ 10 Dec 11 23:18:37 portable kernel: scsi0 : Qlogicfas Driver version 0.46, chip 50 at 230, IRQ 10, TPdma:1 Dec 11 23:18:37 portable kernel: scsi : 1 host. Dec 11 23:18:37 portable kernel: divide error: 0000 Dec 11 23:18:37 portable kernel: CPU: 0 Dec 11 23:18:37 portable kernel: EIP: 0010:[raid0_run+224/364] Dec 11 23:18:37 portable kernel: EFLAGS: 00000282 Dec 11 23:18:37 portable kernel: eax: 00000000 ebx: c3b13744 ecx: c3b13744 edx: c01c0233 Dec 11 23:18:37 portable kernel: esi: 00000000 edi: c3b13750 ebp: c023ae00 esp: c3b136e4 Dec 11 23:18:37 portable kernel: ds: 0018 es: 0018 ss: 0018 Dec 11 23:18:37 portable kernel: Process cardmgr (pid: 1020, process nr: 52, stackpage=c3b13000) Dec 11 23:18:37 portable kernel: Stack: 00000000 00000000 00000000 c020fd60 30000000 00000246 00000088 00000282 Dec 11 23:18:37 portable kernel: 0023a000 c1b2c780 c009e200 c030f620 c011ec01 c009e080 00000246 c009e208 Dec 11 23:18:37 portable kernel: c3b13750 0009e208 00000286 c0dbd340 00000246 00000003 00000008 00000000 Dec 11 23:18:37 portable kernel: Call Trace: [head_vals.663+9611/14031] [sys_mprotect+29/328] [create_strip_zones+223/516] [i82365+65230424/95469568] [do_fork+982/1856] [i82365+65230933/95469568] [head_vals.663+9611/14031] Dec 11 23:18:37 portable kernel: [head_vals.663+9611/14031] [do_debug+147/180] [IRQ0x08_interrupt+4/8] [rw_intr+795/1396] [i82365+65230933/95469568] [rw_intr+795/1396] [i82365+65230424/95469568] [rw_intr+872/1396] Dec 11 23:18:37 portable kernel: [tvecs+33164/39432] [do_fork+982/1856] [i82365+65230424/95469568] [compute_block+15/192] [handle_stripe+510/2236] [i82365+65230424/95469568] [i82365+65224669/95469568] [i82365+65230424/95469568] Dec 11 23:18:37 portable kernel: [i82365+65225432/95469568] [i82365+65215590/95469568] [ds:register_pccard_driver+-71114/272] [ds:register_pccard_driver+-69957/272] [ds:register_pccard_driver+-70520/272] [ds:register_pccard_driver+-74566/272] [call_receive+44/100] [call_bind+4/40] Dec 11 23:18:37 portable kernel: [xprt_transmit+850/1120] [i82365+65225586/95469568] [i82365+65225432/95469568] [ds:register_pccard_driver+-79963/272] [schedule+575/632] [ds:register_pccard_driver+-6591/272] [i82365+65215410/95469568] [ds:register_pccard_driver+-74198/272] Dec 11 23:18:37 portable kernel: [i82365+65223940/95469568] [i82365+65230552/95469568] [i82365+65225432/95469568] [ds:register_pccard_driver+-73735/272] [i82365+65204128/95469568] [i82365+65206561/95469568] [UMSDOS_rmdir+153/332] [umsdos_rename_f+555/744] Dec 11 23:18:37 portable kernel: [sys_rt_sigqueueinfo+38/200] [sys_rt_sigaction+79/348] [UMSDOS_link+967/1008] [tcp_rcv_established+313/1452] [prune_queue+0/260] [umsdos_setup_dir+60/76] [UMSDOS_ioctl_dir+1259/2308] [UMSDOS_ioctl_dir+1275/2308] Dec 11 23:18:37 portable kernel: [remap_page_range+187/632] [new_page_tables+114/168] [zap_page_range+325/452] [put_write_access+9/12] [do_signal+112/748] Dec 11 23:18:37 portable kernel: Code: ff 49 00 0f 88 39 93 02 00 c7 85 b4 00 00 00 00 00 00 00 8b Dec 11 23:18:43 portable kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00 00 Dec 11 23:22:40 portable syslogd 1.3-3: restart. Dec 11 23:22:41 portable kernel: klogd 1.3-3, log source = /proc/kmsg started. Dec 11 23:22:41 portable kernel: Inspecting /boot/System.map

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ 1 ] 

Feedback: RE: More problems (SOLVED) Re: Feedback: More problems with KXL-D740 PCMCIA CDROM (Bruce Forsberg) Date: 1999, Dec 12 From: Bruce Forsberg <forsberg@adnc.com>

I have finally got my Panasonic KXL-D740 working. I got it working by specifying a qlogics low level driver in the kernel. I thought I would only need to specify SCSI support and SCSI cdrom support. I did not realize that I needed to specify a low level driver. I still have not figured out hot to install with this CDROM but at least I can do a minimum install and then install the reset via cdrom. I will see if SUSE will help me with the install part. Bruce Forsberg

That's very odd Re: Feedback: RE: More problems (SOLVED) (Bruce Forsberg) Date: 1999, Dec 13 From: David Hinds <dhinds@pcmcia.sourceforge.org>

You shouldn't need to link the qlogic driver into the kernel; in fact, it should not do any good, and I have no idea why it seems to help. -- Dave

Note: RE: That's very odd Re: That's very odd (David Hinds) Date: 1999, Dec 14 From: Bruce Forsberg <forsberg@adnc.com>

You were right. Sorry for the misinformation. I changed too many things at once. It turns out that when I build the pcmcia sotware with PnP BIOS resource checking to yes then eveything works. If it is set to no then it does not work. With it set to no then I need to set the following: irq_list=11,15 and exclude port 0x230-0x23f With these selected it uses 0xa30. This is what it picks with PnP BIOS set to yes as well. Using these makes the following work: Sony VAIO 505TR laptop. You can add these to the PCMCIA_HOW_TO if you like. I am still trying to get it to install with it though. You told me how to set irq_list. How do I exclude a port range during the install? Thanks, Bruce Forsberg BTW, if you work for VALINUX congrats on the IPO.

[ Add Message ]  to: "More problems with KXL-D740 PCMCIA CDROM"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]