[ Next-in-Thread ]  [ Next Message ] 

Feedback: RE: More problems (SOLVED) 

Forum: Installing Linux using or onto a PCMCIA device
Re: Feedback: More problems with KXL-D740 PCMCIA CDROM (Bruce Forsberg)
Date: 1999, Dec 12
From: Bruce Forsberg <forsberg@adnc.com> 

I have finally got my Panasonic KXL-D740 working. I got it
working by specifying a qlogics low level driver in the
kernel. I thought I would only need to specify SCSI support
and SCSI cdrom support. I did not realize that I needed to
specify a low level driver. I still have not figured out
hot to install with this CDROM but at least I can do a 
minimum install and then install the reset via cdrom. I will
see if SUSE will help me with the install part.

Bruce Forsberg

[ Next-in-Thread ]  [ Next Message ] 

Select this message: RE: More problems (SOLVED)

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. That's very odd by David Hinds, 1999, Dec 13
(_ Note: RE: That's very odd by Bruce Forsberg, 1999, Dec 14

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]