[ Next-in-Thread ]  [ Next Message ] 

It should work 

Forum: Installing Linux using or onto a PCMCIA device
Re: Question: Bridging support and PCMCIA (Jeremy Cook)
Date: 2000, Jan 18
From: David Hinds <dhinds@pcmcia.sourceforge.org> 

There is no reason why bridging should not work for PCMCIA cards.  I
personally have not done it, but I have had reports from people who do
this.  It might be worth posting a question to a Linux networking
newsgroup; if you can verify that both of your network cards are
working (you can ping things on each network), and it is just the
bridging that isn't working, it sounds like it isn't a PCMCIA issue.

-- Dave

[ Next-in-Thread ]  [ Next Message ] 

Select this message: It should work

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Note: I'll try harder... by Jeremy Cook, 2000, Jan 18

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]