Question: More questions about this topics 

Forum: Installing Linux using or onto a PCMCIA device
Re: Question: problem to boot from PCMCIA scsi disk (Marcel van Heemst)
Re: See 'man pcinitrd' and the PCMCIA-HOWTO (David Hinds)
Re: Note: I have found a note! (Marcel van Heemst)
Date: 2000, Mar 18
From: Leonardo Presciuttini leoprex

I have installed TurboLinux 6.0 on an external IDE hard disk with PCMCIA interface (brand: 'Kangourou disk') and got the same problem: at the first boot the Linux partition cannot be seen because the PCMCIA driver is not still loaded. I understand that the problem can be solved following the instructions of chapt.5.3 of the PCMCIA-HOWTO, but they are not understatable to me: I do not know anything about Linux. In particular I cannot understand how I can pass commands to Linux such as pcinitrd when Linux OS is not running. Could an expert write down step-by-step instructions for non-specialists? Gratefully, Leonardo Presciuttini

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 2 ]  [ 3 ]  [ All ] 

1. It is not simple, unfortunately by David Hinds, 2000, Mar 20

... 1 Message(s)

[ Add Message ]  to: "More questions about this topics"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]