[ Next-in-Thread ]  [ Next Message ] 

It is not simple, unfortunately 

Forum: Installing Linux using or onto a PCMCIA device
Re: Question: problem to boot from PCMCIA scsi disk (Marcel van Heemst)
Re: See 'man pcinitrd' and the PCMCIA-HOWTO (David Hinds)
Re: Note: I have found a note! (Marcel van Heemst)
Re: Question: More questions about this topics (Leonardo Presciuttini)
Date: 2000, Mar 20
From: David Hinds <dhinds@pcmcia.sourceforge.org> 

The instructions in the HOWTO were meant to be as step-by-step as I
could manage.  However, this is clearly described as an advanced
procedure.  You cannot do it unless you have access to another linux
system that you can use to create the initrd boot image.  And you
should not try to do it if you are new to linux.

So... the short answer would be "sorry, you just can't do this".

-- Dave

[ Next-in-Thread ]  [ Next Message ] 

Select this message: It is not simple, unfortunately

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Idea: I appreciate it is hard for a neophite, but..... by Leonardo Presciuttini, 2000, Mar 21

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]