Use this page to discuss issues with simple memory cards, such as SRAM or Intel linear flash. Before posting, be sure you've checked any relevant sections of the PCMCIA-HOWTO, such as: Particularly useful bits of information to post include your laptop's make and model; the type(s) of card(s) you are using; and, of course, any relevant system log messages.

Messages Inline: 1 All Outline: 1 2 All

1. Question SmartMedia flash memory as ide device? by Richard K. Belew, 1999, Nov 04
1. None Yes, SmartMedia cards are IDE devices by David Hinds, 1999, Nov 04
2. Question Memory Suggestions ? by Tobias Zügel, 2000, Feb 15
1. None Probably not a good idea by David Hinds, 2000, Feb 15
(_ Question Any other memory opportunities ? by Tobias Zügel, 2000, Feb 15
(_ None Maybe just shop around? by David Hinds, 2000, Feb 15
3. Sad sram is only set up correctly when inserted after network by Lorenz Hahn, 2000, Mar 03
1. None There's a workaround by David Hinds, 2000, Mar 03
(_ Ok Thanx, we're up and running... by Lorenz Hahn, 2000, Mar 07
4. Question Raw-Writing to linear Flash cards does not work at all by Johannes Reisinger, 2000, Apr 19
1. None There does seem to be a problem with iflash2+_mtd by David Hinds, 2000, Apr 19
5. Sad Cisco intel series 2+ card not recognized by Dennis Gerasimov, 2000, May 05
6. Question Howto mount a simple memory card ( NOT flash ) by Francisco Escarpa, 2000, Jun 12
1. None Maybe this isn't a DOS filesystem?? by David Hinds, 2000, Jun 12
(_ None Re: Maybe this isn't a DOS filesystem?? by Francisco Escarpa, 2000, Jun 13

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]