Next-in-Thread Next Message

None There's a workaround 

Forum: PCMCIA Memory Device Issues
Re: Sad sram is only set up correctly when inserted after network (Lorenz Hahn)
Date: 2000, Mar 03
From: David Hinds <dhinds@pcmcia.sourceforge.org>

The PCMCIA subsystem has trouble automatically determining what memory
resources to use, if the first inserted card is a simple memory card.

To work around the problem, add to /etc/sysconfig/pcmcia:

    CORE_OPTS="probe_mem=0"

and maybe edit /etc/pcmcia/config.opts to only include memory ranges
that you know are ok.  To determine this, you can boot with the
network card, and check the system log for the memory probe results.

-- Dave

Next-in-Thread Next Message

Messages Inline: 0 All Outline: 1 3 All

Ok Thanx, we're up and running...

Re: None There's a workaround (David Hinds)
Date: 2000, Mar 07
From: Lorenz Hahn dantuine

Just to give you the positive feedback. I've applied the suggested workaround. Not everything is tested yet, but it looks very good. The filesystem sitting on the sram card is mounted.

Thank you,

Lorenz.

There's a workaround


Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]