Update the port ranges in /etc/pcmcia/config.opts 

Forum: PCMCIA Multifunction Card Issues
Re: Sad: Xircom CEM33 does not work properly with pcmcia-cs 3.1.8 (Martijn Anthonissen)
Date: 2000, Jan 18
From: David Hinds <dhinds@pcmcia.sourceforge.org>

For the moment, just edit /etc/pcmcia/config.opts and change: include port 0x100-0x4ff, port 0x1000-0x17ff to include port 0x100-0x4ff -- Dave

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Ok: This almost did it by Martijn Anthonissen, 2000, Jan 18

[ Add Message ]  to: "Update the port ranges in /etc/pcmcia/config.opts"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]