Next-in-Thread Next Message

Ok This almost did it 

Forum: PCMCIA Multifunction Card Issues
Re: Sad Xircom CEM33 does not work properly with pcmcia-cs 3.1.8 (Martijn Anthonissen)
Re: None Update the port ranges in /etc/pcmcia/config.opts (David Hinds)
Date: 2000, Jan 18
From: Martijn Anthonissen martijn

Dave,

Thanks for your suggestion. It almost did the trick. I also had to comment out the following bit of the /etc/pcmcia/config.opts file to get it working:

#
# Extra port range for IBM Token Ring
#
#include port 0xa00-0xaff
#

Now, both the 2.2.14 kernel with pcmcia modules 3.1.8 and the 2.3.39 unstable linux kernel put the CEM33 modem on /dev/ttyS3, where it should be.

Thanks a lot,

Martijn

Next-in-Thread Next Message

Add Message to: "This almost did it"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10