Ok: This almost did it 

Forum: PCMCIA Multifunction Card Issues
Re: Sad: Xircom CEM33 does not work properly with pcmcia-cs 3.1.8 (Martijn Anthonissen)
Re: Update the port ranges in /etc/pcmcia/config.opts (David Hinds)
Date: 2000, Jan 18
From: Martijn Anthonissen martijn

Dave, Thanks for your suggestion. It almost did the trick. I also had to comment out the following bit of the /etc/pcmcia/config.opts file to get it working: # # Extra port range for IBM Token Ring # #include port 0xa00-0xaff # Now, both the 2.2.14 kernel with pcmcia modules 3.1.8 and the 2.3.39 unstable linux kernel put the CEM33 modem on /dev/ttyS3, where it should be. Thanks a lot, Martijn

[ Next-in-Thread ]  [ Next Message ] 

[ Add Message ]  to: "This almost did it"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]