Next-in-Thread Next Message

Question ComNet 33.6 - Hw. mismap 

Forum: PCMCIA Multifunction Card Issues
Date: 2000, Feb 18
From: smasa

Hello,

I'm looking for help how to set up the multifunction ethernet/modem card ComNet 33.6 from ActionTec. 
I had to add

card "ActionTec"
 manfid 0x0175,0x000
 bind "pcnet_cs"

 The card is recognized then but it doesn't work. I'm running
 Debian potato, apart from the lines above I haven't changed
 any config files. I tried also Debian kernel-2.2.13 and
 older pcmcia with the same errors, only ReleaseWindow
 message is missing.

Feb 18 14:20:09 pc088c kernel: Linux version 2.3.45 (root@pc088c) (gcc version 2.95.2 19991109 (Debian GNU/Linux)) #4 Thu Feb 17 17:50:17 CET 2000
Feb 18 14:20:09 pc088c kernel: e820: 0009f800 @ 00000000 (usable)
Feb 18 14:20:09 pc088c kernel: e820: 00000800 @ 0009f800 (reserved)
Feb 18 14:20:09 pc088c kernel: e820: 00015000 @ 000eb000 (reserved)
Feb 18 14:20:09 pc088c kernel: e820: 03f00000 @ 00100000 (usable)
Feb 18 14:20:09 pc088c kernel: e820: 00015000 @ fffeb000 (reserved)
Feb 18 14:20:09 pc088c kernel: On node 0 totalpages: 16384
Feb 18 14:20:09 pc088c kernel: zone(0): 4096 pages.
Feb 18 14:20:09 pc088c kernel: zone(1): 12288 pages.
Feb 18 14:20:09 pc088c kernel: zone(2): 0 pages.
Feb 18 14:20:09 pc088c kernel: Initializing CPU#0
Feb 18 14:20:09 pc088c kernel: Detected 300696360 Hz processor.
Feb 18 14:20:09 pc088c kernel: Console: colour VGA+ 80x25
Feb 18 14:20:09 pc088c kernel: Calibrating delay loop... 299.83 BogoMIPS
Feb 18 14:20:09 pc088c kernel: Memory: 62472k/65536k available (946k kernel code, 2676k reserved, 83k data, 144k init, 0k highmem)
Feb 18 14:20:09 pc088c kernel: Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Feb 18 14:20:09 pc088c kernel: Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Feb 18 14:20:09 pc088c kernel: CPU: Intel Pentium II (Deschutes) stepping 02
Feb 18 14:20:09 pc088c kernel: Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Feb 18 14:20:09 pc088c kernel: Checking 'hlt' instruction... OK.
Feb 18 14:20:09 pc088c kernel: POSIX conformance testing by UNIFIX
Feb 18 14:20:09 pc088c kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd9e3
Feb 18 14:20:09 pc088c kernel: PCI: Using configuration type 1
Feb 18 14:20:09 pc088c kernel: PCI: Probing PCI hardware
Feb 18 14:20:09 pc088c kernel: PCI: Interrupt Routing Table found at 0xc00fdf60 [router type 8086/122e]
Feb 18 14:20:09 pc088c kernel: PCI: Found IRQ 5 for device 00:05.2 [PIIX]
Feb 18 14:20:09 pc088c kernel: Limiting direct PCI/PCI transfers.
Feb 18 14:20:09 pc088c kernel: Linux NET4.0 for Linux 2.3
Feb 18 14:20:09 pc088c kernel: Based upon Swansea University Computer Society NET3.039
Feb 18 14:20:09 pc088c kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Feb 18 14:20:09 pc088c kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Feb 18 14:20:09 pc088c kernel: IP Protocols: ICMP, UDP, TCP
Feb 18 14:20:09 pc088c kernel: IP: routing cache hash table of 512 buckets, 4Kbytes
Feb 18 14:20:09 pc088c kernel: TCP: Hash tables configured (established 4096 bind 8192)
Feb 18 14:20:09 pc088c kernel: Starting kswapd v1.6
Feb 18 14:20:09 pc088c kernel: Serial driver version 4.92 (2000-1-27) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Feb 18 14:20:09 pc088c kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Feb 18 14:20:09 pc088c kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Feb 18 14:20:09 pc088c kernel: pty: 256 Unix98 ptys configured
Feb 18 14:20:09 pc088c kernel: Uniform Multi-Platform E-IDE driver Revision: 6.30
Feb 18 14:20:09 pc088c kernel: hda: TOSHIBA MK4309MAT, ATA DISK drive
Feb 18 14:20:09 pc088c kernel: hdc: TOSHIBA CD-ROM XM-1802B, ATAPI CDROM drive
Feb 18 14:20:09 pc088c kernel: ide6: ports already in use, skipping probe
Feb 18 14:20:09 pc088c kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 18 14:20:09 pc088c kernel: ide1 at 0x170-0x177,0x376 on irq 15
Feb 18 14:20:09 pc088c kernel: hda: TOSHIBA MK4309MAT, 4126MB w/0kB Cache, CHS=559/240/63
Feb 18 14:20:09 pc088c kernel: hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Feb 18 14:20:09 pc088c kernel: Uniform CD-ROM driver Revision: 3.06
Feb 18 14:20:09 pc088c kernel: Partition check:
Feb 18 14:20:09 pc088c kernel:  hda: hda1 hda2 hda3
Feb 18 14:20:09 pc088c kernel: Floppy drive(s): fd0 is 1.44M
Feb 18 14:20:09 pc088c kernel: FDC 0 is a post-1991 82077
Feb 18 14:20:09 pc088c kernel: eepro100.c:v1.09j+LK1.0 Feb 13, 2000  Linux Kernel Team  http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
Feb 18 14:20:09 pc088c kernel: eepro100: No cards found, driver not installed.
Feb 18 14:20:09 pc088c kernel: Linux PCMCIA Card Services 3.1.9
Feb 18 14:20:09 pc088c kernel:   options:  [pci] [cardbus]
Feb 18 14:20:09 pc088c kernel: Adding cardbus controller 0: Texas Instruments PCI1250
Feb 18 14:20:09 pc088c kernel: Yenta IRQ list 0c98, PCI irq9
Feb 18 14:20:09 pc088c kernel: Socket status: 30000006
Feb 18 14:20:09 pc088c kernel: Adding cardbus controller 1: Texas Instruments PCI1250 (#2)
Feb 18 14:20:09 pc088c kernel: Yenta IRQ list 0c98, PCI irq9
Feb 18 14:20:09 pc088c kernel: Socket status: 30000010
Feb 18 14:20:09 pc088c kernel: Intel PCIC probe: not found.
Feb 18 14:20:09 pc088c kernel: Databook TCIC-2 PCMCIA probe: not found.
Feb 18 14:20:09 pc088c kernel: VFS: Mounted root (ext2 filesystem) readonly.
Feb 18 14:20:09 pc088c kernel: Freeing unused kernel memory: 144k freed
Feb 18 14:20:09 pc088c kernel: Adding Swap: 30236k swap-space (priority -1)
Feb 18 14:21:51 pc088c kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff
Feb 18 14:21:51 pc088c kernel: cs: IO port probe 0x0800-0x08ff: clean.
Feb 18 14:21:51 pc088c kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x158-0x15f 0x378-0x37f 0x3c0-0x3df 0x4d0-0x4d7
Feb 18 14:21:51 pc088c kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Feb 18 14:21:51 pc088c kernel: pcnet_cs: ReleaseWindow: Bad handle
Feb 18 14:21:51 pc088c kernel: eth0: NE2000 Compatible: io 0x300, irq 3, auto xcvr, hw_addr 00:20:E0:0C:8B:8D
Feb 18 14:21:51 pc088c kernel: Hw. address read/write mismap 1
Feb 18 14:21:51 pc088c kernel: Hw. address read/write mismap 5

after ping I get
Feb 18 14:16:29 pc088c kernel: eth0: interrupt(s) dropped!
Feb 18 14:16:29 pc088c kernel: eth0: mismatched read page pointers  1 vs 4c.
Feb 18 14:16:29 pc088c kernel: eth0: Too much work at interrupt, status 0x20
Feb 18 14:16:29 pc088c kernel: eth0: mismatched read page pointers  1 vs 40.
Feb 18 14:16:29 pc088c kernel: eth0: Too much work at interrupt, status 0x20
Feb 18 14:16:29 pc088c kernel: eth0: mismatched read page pointers  1 vs 40.
Feb 18 14:16:29 pc088c kernel: eth0: unexpected TX-done interrupt, lasttx=20.
Feb 18 14:16:29 pc088c kernel: eth0: Too much work at interrupt, status 0x20
Feb 18 14:16:29 pc088c kernel: eth0: mismatched read page pointers  1 vs 40.
Feb 18 14:16:29 pc088c kernel: eth0: unexpected TX-done interrupt, lasttx=20.
Feb 18 14:16:29 pc088c kernel: eth0: Too much work at interrupt, status 0x20


I've tried also another ne2000 clone which worked fine. The laptop is LEO DESIGNote 7000.
Thank you in advance.

Jiri

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None Bad kernel choice by David Hinds, 2000, Feb 18
1. None Re: Bad kernel choice by smasa, 2000, Feb 18
(_ None Then it's not a supported card, unfortunately by David Hinds, 2000, Feb 19
(_ None Unsupported ? by Vlada Silvreta, 2000, Jul 04
2. Question Untitled by Vlada Silvreta, 2000, Jul 04
1. None Re: Question: Untitled by Jiri Masik, 2000, Jul 07

Add Message to: "ComNet 33.6 - Hw. mismap"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10