Question: Xircom RBEM56G + serial port problem 

Forum: PCMCIA Multifunction Card Issues
Date: 2000, Feb 23
From: Sebastien Stormacq sebsto

Hello, I have the following problem with a Xircom RBEM56G-100 (Card Bus) The cardmgr correctly recognize the card but set it on ttyS0 instead of ttyS2 This prevents me to use my real serial port ttyS0 (link to a palmpilot) I found a workaround (thanks to Philipe Henry / phenry@resopharma.fr) : removing the setserial command (or removing its eXecute rigth) makes everything works OK (card is recognized, modem is installed on ttyS2 and is working and my real ttyS0 works fine) Why this behavior ? Any cleaner solution ? Thanks Seb my config : DELL Latitude CPx H500 Xirxom RBEM56G-100BTX pcmcia 3.1.11 and kernel 2.2.14 (upgraded from SuSE 6

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Find out what is invoking setserial? by David Hinds, 2000, Feb 23

[ Add Message ]  to: "Xircom RBEM56G + serial port problem"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]