Next-in-Thread Next Message

Question Problem with Xircom RBEM56G-100 (Real-Port Cardbus Ethernet 10/100 +Modem 56) 

Forum: PCMCIA Multifunction Card Issues
Date: 2000, Feb 25
From: HelmutS dihelsch03

I have a Problem with my Xircom RBEM56G-100 (Real-Port Cardbus Ethernet 10/100 +Modem 56). I'm using SuSE Linux 6.3. The card is detected by the cardmgr. The Modules cb_enabler, tulip and serial_cb are loaded. The Laptop (Compaq Armada 7800) hangs, when the Module serial_cb is loaded. Can someone help me?

Regards

dihelsch03

Next-in-Thread Next Message

Select this message: Problem with Xircom RBEM56G-100 (Real-Port Cardbus Ethernet 10/100 +Modem 56)

Messages Inline: 1 All Outline: 2 3 All

1. None System log messages? by David Hinds, 2000, Feb 25
2. Question Modem Works fine, but Modul tulip_cb.o hangs system by HelmutS, 2000, Feb 27

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]