Next-in-Thread Next Message

Question Problem with Xircom Cardbus 10/100 + Modem 56 

Forum: PCMCIA Multifunction Card Issues
Date: 2000, Feb 28
From: HelmutS dihelsch03

The Modem works perfect, but the Ethernet Interface has a Problem. I can ping the loopback Interface and his own IP-Address. If I ping a other host in the same Subnet, I get no response. How Many Interrupts does this Card need (1 or 2)? Can anyone help me?

Here the Syslog Messages:

Feb 28 17:09:43 obelix kernel: Linux PCMCIA Card Services 3.1.3
Feb 28 17:09:43 obelix kernel:   kernel build: 2.2.13 #1 Mon Nov 8 18:28:35 GMT 1999
Feb 28 17:09:43 obelix kernel:   options:  [pci] [cardbus] [pnp]
Feb 28 17:09:43 obelix kernel: Intel PCIC probe: 
Feb 28 17:09:43 obelix kernel:   TI 1250A PCI-to-CardBus at bus 0 slot 12, mem 0x7fffe000, 2 sockets
Feb 28 17:09:43 obelix kernel:     host opts [0]: [pwr save] [pci + serial irq] [no pci irq] [lat 66/176] [bus 2/2]
Feb 28 17:09:43 obelix kernel:     host opts [1]: [pwr save] [pci + serial irq] [no pci irq] [lat 66/176] [bus 3/3]
Feb 28 17:09:43 obelix kernel:     ISA irqs (default) = 3,10 polling interval = 1000 ms
Feb 28 17:09:43 obelix kernel: cs: IO port probe 0x1000-0x17ff: clean.
Feb 28 17:09:43 obelix kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x250-0x257 0x330-0x337 0x378-0x37f 0x388-0x38f 0x408-0x40f 0x4d0-0x4d7
Feb 28 17:09:43 obelix kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Feb 28 17:09:43 obelix kernel: cs: cb_alloc(bus 2): vendor 0x115d, device 0x0003
Feb 28 17:09:43 obelix kernel: ROM image dump:
Feb 28 17:09:43 obelix kernel:   image 0: 0x000000-0x0001ff, signature PCIR
Feb 28 17:09:43 obelix kernel: cs: cb_config(bus 2)
Feb 28 17:09:43 obelix kernel:   fn 0 bar 2: mem 0x60017000-0x600177ff
Feb 28 17:09:43 obelix kernel:   fn 0 bar 3: mem 0x60016000-0x600167ff
Feb 28 17:09:43 obelix kernel:   fn 1 bar 1: io 0x180-0x187
Feb 28 17:09:43 obelix kernel:   fn 1 bar 2: mem 0x60015000-0x600157ff
Feb 28 17:09:43 obelix kernel:   fn 1 bar 3: mem 0x60014000-0x600147ff
Feb 28 17:09:43 obelix kernel:   fn 0 bar 1: io 0x100-0x17f
Feb 28 17:09:43 obelix kernel:   fn 0 rom: mem 0x60010000-0x60013fff
Feb 28 17:09:43 obelix kernel:   fn 1 rom: mem 0x6000c000-0x6000ffff
Feb 28 17:09:43 obelix kernel: cs: cb_enable(bus 2)
Feb 28 17:09:43 obelix kernel:   bridge io map 0 (flags 0x21): 0x100-0x187
Feb 28 17:09:43 obelix kernel:   bridge mem map 0 (flags 0x1): 0x6000c000-0x60017fff
Feb 28 17:09:43 obelix kernel: serial_attach(bus 2, fn 0)
Feb 28 17:09:43 obelix kernel: tty16 at 0x0100 (irq = 3) is a 8250
Feb 28 17:09:43 obelix kernel: tulip_attach(bus 2, function 1)
Feb 28 17:09:43 obelix kernel: tulip.c:v0.91 4/14/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford)
Feb 28 17:09:43 obelix kernel: eth0: Digital DS21143 Tulip rev 3 at 0x180, EEPROM not present, 00:4C:69:6E:75:79, IRQ 3.
Feb 28 17:09:43 obelix kernel: eth0:  Missing EEPROM, this interface may not work correctly!
Feb 28 17:09:43 obelix kernel: eth0: tulip_open() irq 3.
Feb 28 17:09:43 obelix kernel: eth0: Restarting 21143 autonegotiation, 0003ffff.
Feb 28 17:09:43 obelix kernel: eth0: 21143 negotiation failed, status ffffffff.
Feb 28 17:09:43 obelix kernel: eth0: Testing new 21143 media 100baseTx.
Feb 28 17:09:43 obelix kernel: eth0: Tx hung, 11 vs. 0.
Feb 28 17:09:43 obelix kernel: eth0: 21140 transmit timed out, status ffffffff, SIA ffffffff ffffffff ffd0ffd0 ffffffff, resetting...
Feb 28 17:09:46 obelix kernel: eth0: No 21143 100baseTx link beat, ffffffff, trying NWay.
Feb 28 17:09:46 obelix kernel: eth0: Restarting 21143 autonegotiation, 0003ffff.
Feb 28 17:09:49 obelix kernel: eth0: 21143 negotiation failed, status ffffffff.
Feb 28 17:09:49 obelix kernel: eth0: Testing new 21143 media 100baseTx.
Feb 28 17:09:49 obelix kernel: eth0: Tx hung, 11 vs. 0.
Feb 28 17:09:49 obelix kernel: eth0: 21140 transmit timed out, status ffffffff, SIA ffffffff ffffffff ff00ff00 ffffffff, resetting...
Feb 28 17:09:52 obelix kernel: eth0: No 21143 100baseTx link beat, ffffffff, trying NWay.
Feb 28 17:09:52 obelix kernel: eth0: Restarting 21143 autonegotiation, 0003ffff.
Feb 28 17:09:53 obelix sshd[185]: log: Server listening on port 22.
Feb 28 17:09:53 obelix sshd[185]: log: Generating 768 bit RSA key.
Feb 28 17:09:53 obelix /usr/sbin/cron[189]: (CRON) STARTUP (fork ok) 
Feb 28 17:09:53 obelix in.identd[193]: started
Feb 28 17:09:54 obelix sshd[185]: log: RSA key generation complete.
Feb 28 17:09:55 obelix kernel: eth0: 21143 negotiation failed, status ffffffff.
Feb 28 17:09:55 obelix kernel: eth0: Testing new 21143 media 100baseTx.
Feb 28 17:09:55 obelix kernel: eth0: Tx hung, 11 vs. 0.
Feb 28 17:09:55 obelix kernel: eth0: 21140 transmit timed out, status ffffffff, SIA ffffffff ffffffff ff6aff6a ffffffff, resetting...
Feb 28 17:09:58 obelix kernel: eth0: No 21143 100baseTx link beat, ffffffff, trying NWay.

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None Maybe a bad PCMCIA driver version by David Hinds, 2000, Feb 28
2. Sad Update from PCMCIA 3.1.3 to 3.1.11 but nothing changed by HelmutS, 2000, Mar 06
1. None New system log messages needed by David Hinds, 2000, Mar 06

Add Message to: "Problem with Xircom Cardbus 10/100 + Modem 56"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10