Next-in-Thread Next Message

None Some things to try 

Forum: PCMCIA Multifunction Card Issues
Re: Question Modem not working in Linksys PCMLM56 and 2.2.14 (Ivan Kocher)
Date: 2000, Mar 22
From: David Hinds <dhinds@pcmcia.sourceforge.org>

I have not had other reports of similar problems, so I don't believe
that it is a kernel bug.  But I'm not sure what the problem is,
either.  The easy way to determine if interrupt sharing is the problem
is to just do:

  setserial /dev/modem irq 0

and see if the modem seems to work better after that.  Also, as long
as you are recompiling PCMCIA anyway, I would suggest getting the
current PCMCIA package, which is version 3.1.13.

> CONFIG_SERIAL=y
> CONFIG_SERIAL_CONSOLE=y
> CONFIG_SERIAL_EXTENDED=y
> CONFIG_SERIAL_MANY_PORTS=y
> CONFIG_SERIAL_SHARE_IRQ=y
> # CONFIG_SERIAL_DETECT_IRQ is not set
> CONFIG_SERIAL_MULTIPORT=y
> CONFIG_HUB6=y
> # CONFIG_SERIAL_NONSTANDARD is not set

In my 2.2.* kernel configuration, I have:

CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
CONFIG_SERIAL_EXTENDED=y
# CONFIG_SERIAL_MANY_PORTS is not set
CONFIG_SERIAL_SHARE_IRQ=y
# CONFIG_SERIAL_DETECT_IRQ is not set
# CONFIG_SERIAL_MULTIPORT is not set
# CONFIG_HUB6 is not set
# CONFIG_SERIAL_NONSTANDARD is not set

so it might be useful to try changing your kernel configuration to
match this, to see if one of these is causing a problem.

-- Dave

Next-in-Thread Next Message

Add Message to: "Some things to try"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10