I don't think this is a PCMCIA problem; the messages are fine 

Forum: PCMCIA Multifunction Card Issues
Re: 3CXEM556BT network not recognized (Pam Akazawa)
Re: There may be nothing wrong (David Hinds)
Re: low beep without network (Pam Akazawa)
Re: Whether the cable is connected is not important (David Hinds)
Re: contents of dmesg (Pam Akazawa)
Date: 2000, May 01
From: David Hinds <dhinds@pcmcia.sourceforge.org>

I don't know what you mean by "share a printer". Share with what? Is this a printer that directly connects to the network, or a printer hooked up to another computer? If you intend to transfer data over this ethernet card for any purpose, you have to assign an IP address to your computer. You almost certainly don't want to be using BOOTP for this. I think this is really just a basic network setup question, and not a PCMCIA problem. It might be best to check through a book (or the HOWTO's) for help about how to configure networking. -- Dave

Messages Inline: Outline:

1. used this card in the past. by Pam Akazawa, 2000, May 01

(_ I'm stumped by David Hinds, 2000, May 01

(_ ??? IRQ conflict???? by Pam Akazawa, 2000, May 07

(_ This is not an irq or port problem by David Hinds, 2000, May 08

to: "I don't think this is a PCMCIA problem; the messages are fine"