Re: Question: SMC Ethernet/Modem Multifunction card 

Forum: PCMCIA Multifunction Card Issues
Re: SMC Ethernet/Modem Multifunction card (Giray Devlet)
Date: 2000, Jul 27
From: David Hinds <dhinds@pcmcia.sourceforge.org>

> Is there a way to specify another function? Can you send me the output of "dump_cis"? -- Dave

Messages Inline: Outline:

Re: Question: SMC Ethernet/Modem Multifunction card Re: Re: Question: SMC Ethernet/Modem Multifunction card (David Hinds) Date: 2000, Jul 27 From: Giray Devlet <giray@osc.nl>

On Thu, 27 Jul 2000, David Hinds wrote: > Can you send me the output of "dump_cis"? here you go ... gd [root@turkuaz /root]# dump_cis Socket 0: dev_info no_info vers_1 4.1, "SMC", "ETHEREZ ETHERNET/MODEM 8020", "V1.00", "E.N.A.:00E0290AE833" manfid 0x0108, 0x0001 funcid serial_port serial_interface uart 16550 [space/mark/odd/even] [7/8] [1/2] serial_modem_cap_data flow [XON/XOFF xmit] [XON/XOFF rcv] [hw xmit] [hw rcv] [transparent] cmd_buf 64 rcv_buf 768 xmit_buf 768 serial_modem_cap_fax flow [XON/XOFF xmit] [XON/XOFF rcv] [hw xmit] [hw rcv] [transparent] cmd_buf 64 rcv_buf 1228 xmit_buf 1228 serial_modem_cap_voice flow [XON/XOFF xmit] [XON/XOFF rcv] [hw xmit] [hw rcv] [transparent] cmd_buf 64 rcv_buf 1228 xmit_buf 1228 serial_data_services data_rate 115200 modulation [Bell103] [V.21] [V.23] [V.22] [Bell212A] [V.22bis] [V.27bis] [V.32bis] [V.34] [rfu] error_control [MNP2-4] [V.42/LAPM] compression [V.42bis] [MNP5] cmd_protocol [AT1] [AT2] [AT3] [MNP_AT] serial_fax_services [class=1] data_rate 115200 modulation [V.21-C2] [V.27ter] [V.29] [V.17] [V.33] features [T.4] [error] [voice] [poll] [file] serial_fax_services [class=2] data_rate 115200 modulation [V.21-C2] [V.27ter] [V.29] [V.17] [V.33] features [T.4] [voice] [poll] config base 0x8020 mask 0x0077 last_index 0x05 cftable_entry 0x05 [default] [rdybsy] [audio] [pwrdown] Vcc Vnom 5V Vmin 4750mV Vmax 5250mV Istatic 200mA Iavg 450mA Ipeak 650mA Idown 500uA timing ready 500ms io 0x0000-0x0007 [lines=3] [8bit] irq mask 0x9ebc [level]

1. This card can't be supported easily by David Hinds, 2000, Jul 28

to: "Re: Question: SMC Ethernet/Modem Multifunction card"