Next-in-Thread Next Message

None Re: Question: SMC Ethernet/Modem Multifunction card 

Forum: PCMCIA Multifunction Card Issues
Re: Question SMC Ethernet/Modem Multifunction card (Giray Devlet)
Date: 2000, Jul 27
From: David Hinds <dhinds@pcmcia.sourceforge.org>

> Is there a way to specify another function?

Can you send me the output of "dump_cis"?

-- Dave

Next-in-Thread Next Message

Messages Inline: 0 All Outline: 1 3 All

None Re: Question: SMC Ethernet/Modem Multifunction card

Re: None Re: Question: SMC Ethernet/Modem Multifunction card (David Hinds)
Date: 2000, Jul 27
From: Giray Devlet <giray@osc.nl>

On Thu, 27 Jul 2000, David Hinds wrote:

> Can you send me the output of "dump_cis"?

here you go ...

gd

[root@turkuaz /root]# dump_cis
Socket 0:
  dev_info
    no_info
  vers_1 4.1, "SMC", "ETHEREZ ETHERNET/MODEM 8020", "V1.00",
    "E.N.A.:00E0290AE833"
  manfid 0x0108, 0x0001
  funcid serial_port
  serial_interface
    uart 16550 [space/mark/odd/even] [7/8] [1/2]
  serial_modem_cap_data
    flow [XON/XOFF xmit] [XON/XOFF rcv] [hw xmit] [hw rcv] [transparent]
    cmd_buf 64 rcv_buf 768 xmit_buf 768
  serial_modem_cap_fax
    flow [XON/XOFF xmit] [XON/XOFF rcv] [hw xmit] [hw rcv] [transparent]
    cmd_buf 64 rcv_buf 1228 xmit_buf 1228
  serial_modem_cap_voice
    flow [XON/XOFF xmit] [XON/XOFF rcv] [hw xmit] [hw rcv] [transparent]
    cmd_buf 64 rcv_buf 1228 xmit_buf 1228
  serial_data_services
    data_rate 115200
    modulation [Bell103] [V.21] [V.23] [V.22] [Bell212A]
      [V.22bis] [V.27bis] [V.32bis] [V.34] [rfu]
    error_control [MNP2-4] [V.42/LAPM]
    compression [V.42bis] [MNP5]
    cmd_protocol [AT1] [AT2] [AT3] [MNP_AT]
  serial_fax_services [class=1]
    data_rate 115200
    modulation [V.21-C2] [V.27ter] [V.29] [V.17] [V.33]
    features [T.4] [error] [voice] [poll] [file]
  serial_fax_services [class=2]
    data_rate 115200
    modulation [V.21-C2] [V.27ter] [V.29] [V.17] [V.33]
    features [T.4] [voice] [poll]
  config base 0x8020 mask 0x0077 last_index 0x05
  cftable_entry 0x05 [default]
    [rdybsy] [audio] [pwrdown]
    Vcc Vnom 5V Vmin 4750mV Vmax 5250mV Istatic 200mA
      Iavg 450mA Ipeak 650mA Idown 500uA
    timing ready 500ms
    io 0x0000-0x0007 [lines=3] [8bit]
    irq mask 0x9ebc [level]
1. None This card can't be supported easily by David Hinds, 2000, Jul 28
Re: Question: SMC Ethernet/Modem Multifunction card


Add Message to: "Re: Question: SMC Ethernet/Modem Multifunction card"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10