Next-in-Thread Next Message

Question Linksys PCMLM56 & Chicony MP983

Date: 2000, Aug 02
From: Ryan Elliott <>


I'm trying to get this combo card working on my machine.

I'm running redhat 6.2 (out of the box as far as the kernel
and pcmcia versions are concerned).

there are no error messages from cardmgr.  I do receive the
one high beep and one low beep,
but I believe this is because I don't have the ethernet line
pluged in so the lan connection is not sucessfully completed.

setserial returns a uart of 8250.

The ports and irq are set by cardmgr are the same as under
windoze and everything seems to work fine there.

the modem is recoginized and correctly setup if "pcnet_cs" is
removed from the bind line for the card in config

Any suggestions?

					Ryan Elliott

Next-in-Thread Next Message

Select this message: Linksys PCMLM56 & Chicony MP983

Messages Inline: 1 All Outline: 1 2 All

1. None Need more information by David Hinds, 2000, Aug 02
(_ None here we go... by Ryan Elliott, 2000, Aug 02
(_ None I don't know by David Hinds, 2000, Aug 02

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode No Frames New Base Frame Help for HyperNews at 1.10
[ Edit This Forum ]