correct. when the modem is identified as 8250 it does not work when identified as 16550A it does work. I can't cut-and-paste the logs but i'll try to copy them by hand.... -------------------------------------------------------- identified as 8250 -- i.e. bind "pcnet_cs", "serial_cs" initalizing socket 0 socket 0: Linksys EtherFast LANmodem 56k memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa00fffff executing 'insmod /lib/modules/2.2.14-5.0/net/8390.o' executing 'insmod /lib/modules/2.2.14-5.0/pcmcia/pcnet_cs.o' executing 'insmod /lib/modules/2.2.14-5.0/pcmcia/serial_cs.o' eth0: NE2000 Compatible: io 0x300, irq 11, hw_addr 00:E0:98:7f:75:48 tty01 at 0x02f8 (irq = 11) is a 8250 executing: './network start eth0' + usage: ifup <device name> start cmd exited with status 1 executing: './serial start ttyS1' -------------------------------------------------------- identified as 16550A -- i.e. bind "serial_cs" initalizing socket 0 socket 0: Linksys EtherFast LANmodem 56k memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa00fffff executing 'insmod /lib/modules/2.2.14-5.0/pcmcia/serial_cs.o' tty01 at 0x02f8 (irq = 11) is a 16550A executing: './serial start ttyS1' ---------------------------------------------------------- log of pcmcia services startup..... Starting PCMCIA services: modules Linux PCMCIA Card Services 3.1.8 kernel build: 2.2.14-5.0 #1 Tue Mar 7 20:53:41 EST 2000 options: [pci] [cardbus] [apm] Intel PCIC probe: O2Micro OZ6836/OZ6860 PCI-toCardBus at bus 0 slot 7, mem 0x68000000, 2 sockets host opts [0]: [a 44] [b 0d] [c 00] [d 02] [mhpg 18] [fifo 00] [e 1a] [no pci irq] [lat 64/176] [bus 32/34] host opts [1]: [a 44] [b 01][c 50] [d 02] [mhpg 18] [fifo 00] [e 1a] [no pci irq] [lat 64/176] [bus 35/37] ISA irqs (scanned) = 11 polling interval = 1000ms cardmgr. Starting pcmcia succeeded starting, version is 3.1.8 watching 2 sockets cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-ox22f 0x330-0x337 0x378-0x38f 0x388-0x38f 0x398-0x39f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7 ------------------------------------------- hopefully this will let you know what is going on. Thanks Ryan |
Messages