Next-in-Thread Next Message

More more information on the problem

Re: Sad still have the darn problem
Date: 1999, Dec 30
From: jgu1025

I am runnign redhat 6.1 with kernel 2.2.13 and pcmcia 3.1.6, and have the cardbus set to 16bit in the BIOS. The Xircom card gets recognized correctly because I always hear two beeps when the machine boots up. I can ping both 127.0.0.1 and my own ip. But if I try to ping other machines on the network, it always says destination unreachable. Also, I got the timeout message in the message log. Here is the output in /var/log/message:

Dec 29 16:44:39 jg pcmcia: Starting PCMCIA services:
Dec 29 16:44:39 jg pcmcia: modules
Dec 29 16:44:39 jg kernel: Linux PCMCIA Card Services 3.1.6
Dec 29 16:44:39 jg kernel: kernel build: 2.2.13 #4 Fri Dec 17 18:08:28 PST 199
9
Dec 29 16:44:39 jg kernel: options: [pci] [cardbus]
Dec 29 16:44:39 jg kernel: Intel PCIC probe:
Dec 29 16:44:39 jg kernel: Toshiba ToPIC95-B PCI-to-CardBus at bus 0 slot 11,
mem 0x68000000, 2 sockets
Dec 29 16:44:39 jg kernel: host opts [0]: [slot 0xf0] [ccr 0x10] [cdr 0x86]
[rcr 0x02] [no pci irq] [lat 168/176] [bus 20/20]
Dec 29 16:44:39 jg kernel: host opts [1]: [slot 0xf0] [ccr 0x20] [cdr 0x86]
[rcr 0x02] [no pci irq] [lat 168/176] [bus 21/21]
Dec 29 16:44:39 jg kernel: ISA irqs (default) = 3,4,7,9,10,12 polling interv
al = 1000 ms
Dec 29 16:44:39 jg pcmcia: cardmgr.
Dec 29 16:44:39 jg cardmgr[374]: starting, version is 3.1.6
Dec 29 16:44:39 jg rc: Starting pcmcia succeeded
Dec 29 16:44:39 jg cardmgr[374]: watching 2 sockets
Dec 29 16:44:39 jg kernel: cs: IO port probe 0x1000-0x17ff: clean.
Dec 29 16:44:39 jg kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x330-0x33
7 0x378-0x37f 0x4d0-0x4d7
Dec 29 16:44:39 jg kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Dec 29 16:44:39 jg inet: inetd startup succeeded
Dec 29 16:44:39 jg kernel: cs: cb_alloc(bus 20): vendor 0x115d, device 0x0003
Dec 29 16:44:39 jg cardmgr[374]: initializing socket 0
Dec 29 16:44:39 jg cardmgr[374]: socket 0: Xircom CardBus 10/100 Ethernet + 56K
Modem
Dec 29 16:44:40 jg cardmgr[374]: executing: 'insmod /lib/modules/2.2.13/pcmcia/c
b_enabler.o'
Dec 29 16:44:40 jg cardmgr[374]: executing: 'insmod /lib/modules/2.2.13/pcmcia/t
ulip_cb.o'
Dec 29 16:44:40 jg cardmgr[374]: executing: 'insmod /lib/modules/2.2.13/pcmcia/s
erial_cb.o'
Dec 29 16:44:40 jg kernel: cs: cb_config(bus 20)
Dec 29 16:44:40 jg kernel: fn 0 bar 2: mem 0x60013000-0x600137ff
Dec 29 16:44:40 jg kernel: fn 0 bar 3: mem 0x60012000-0x600127ff
Dec 29 16:44:40 jg kernel: fn 1 bar 1: io 0x480-0x487
Dec 29 16:44:40 jg kernel: fn 1 bar 2: mem 0x60011000-0x600117ff
Dec 29 16:44:40 jg kernel: fn 1 bar 3: mem 0x60010000-0x600107ff
Dec 29 16:44:40 jg kernel: fn 0 bar 1: io 0x400-0x47f
Dec 29 16:44:40 jg kernel: fn 0 rom: mem 0x6000c000-0x6000ffff
Dec 29 16:44:40 jg kernel: fn 1 rom: mem 0x60008000-0x6000bfff
Dec 29 16:44:40 jg kernel: tulip_attach(bus 20, function 0)
Dec 29 16:44:40 jg kernel: tulip.c:v0.91 4/14/99 becker@cesdis.gsfc.nasa.gov (mo
dified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford)
Dec 29 16:44:40 jg kernel: eth0: Xircom Cardbus Adapter (DEC 21143 compatible mo
de) rev 3 at 0x400, 00:10:A4:FB:F6:70, IRQ 3.
Dec 29 16:44:40 jg kernel: eth0: MII transceiver #0 config 3100 status 7809 adv
ertising 01e1.
Dec 29 16:44:40 jg kernel: serial_attach(bus 20, fn 1)
Dec 29 16:44:40 jg kernel: tty02 at 0x0480 (irq = 3) is a 16550A
Dec 29 16:44:40 jg cardmgr[374]: executing: './network start eth0'


The contents of /var/state/pcmcia/stab:

Socket 0: Xircom CardBus 10/100 Ethernet + 56K Modem
0 network tulip_cb 0 eth0
0 serial serial_cb 0 ttyS2 4 66
Socket 1: empty

Output from cardctl:

[root@jg pcmcia]# cardctl ident
Socket 0:
  product info: "Xircom", "CardBus Ethernet 10/100 + Modem 56", "CBEM56G", "1.03"
  manfid: 0x0105, 0x0103
  function: 6 (network)
Socket 1:
  no product info available

The transmit timeout message I got are the following:

Dec 29 16:53:15 jg kernel: eth0: Transmit timed out, status 686980c7, CSR12 0000
00c2, resetting...
Dec 29 16:53:50 jg last message repeated 7 times
Dec 29 16:54:55 jg last message repeated 13 times
Dec 29 16:56:00 jg last message repeated 13 times

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None Maybe a simple interrupt problem, maybe worse... by David Hinds, 1999, Dec 30

Add Message to: "more information on the problem"

Members Subscribe Admin Mode No Frames New Base Frame Help for HyperNews at pcmcia-cs.sourceforge.net 1.10