|
I am runnign redhat 6.1 with kernel 2.2.13 and pcmcia 3.1.6, and have the cardbus set to 16bit in the BIOS. The Xircom card gets recognized correctly because I always hear two beeps when the machine boots up. I can ping both 127.0.0.1 and my own ip. But if I try to ping other machines on the network, it always says destination unreachable. Also, I got the timeout message in the message log. Here is the output in /var/log/message: Dec 29 16:44:39 jg pcmcia: Starting PCMCIA services: Dec 29 16:44:39 jg pcmcia: modules Dec 29 16:44:39 jg kernel: Linux PCMCIA Card Services 3.1.6 Dec 29 16:44:39 jg kernel: kernel build: 2.2.13 #4 Fri Dec 17 18:08:28 PST 199 9 Dec 29 16:44:39 jg kernel: options: [pci] [cardbus] Dec 29 16:44:39 jg kernel: Intel PCIC probe: Dec 29 16:44:39 jg kernel: Toshiba ToPIC95-B PCI-to-CardBus at bus 0 slot 11, mem 0x68000000, 2 sockets Dec 29 16:44:39 jg kernel: host opts [0]: [slot 0xf0] [ccr 0x10] [cdr 0x86] [rcr 0x02] [no pci irq] [lat 168/176] [bus 20/20] Dec 29 16:44:39 jg kernel: host opts [1]: [slot 0xf0] [ccr 0x20] [cdr 0x86] [rcr 0x02] [no pci irq] [lat 168/176] [bus 21/21] Dec 29 16:44:39 jg kernel: ISA irqs (default) = 3,4,7,9,10,12 polling interv al = 1000 ms Dec 29 16:44:39 jg pcmcia: cardmgr. Dec 29 16:44:39 jg cardmgr[374]: starting, version is 3.1.6 Dec 29 16:44:39 jg rc: Starting pcmcia succeeded Dec 29 16:44:39 jg cardmgr[374]: watching 2 sockets Dec 29 16:44:39 jg kernel: cs: IO port probe 0x1000-0x17ff: clean. Dec 29 16:44:39 jg kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x330-0x33 7 0x378-0x37f 0x4d0-0x4d7 Dec 29 16:44:39 jg kernel: cs: IO port probe 0x0a00-0x0aff: clean. Dec 29 16:44:39 jg inet: inetd startup succeeded Dec 29 16:44:39 jg kernel: cs: cb_alloc(bus 20): vendor 0x115d, device 0x0003 Dec 29 16:44:39 jg cardmgr[374]: initializing socket 0 Dec 29 16:44:39 jg cardmgr[374]: socket 0: Xircom CardBus 10/100 Ethernet + 56K Modem Dec 29 16:44:40 jg cardmgr[374]: executing: 'insmod /lib/modules/2.2.13/pcmcia/c b_enabler.o' Dec 29 16:44:40 jg cardmgr[374]: executing: 'insmod /lib/modules/2.2.13/pcmcia/t ulip_cb.o' Dec 29 16:44:40 jg cardmgr[374]: executing: 'insmod /lib/modules/2.2.13/pcmcia/s erial_cb.o' Dec 29 16:44:40 jg kernel: cs: cb_config(bus 20) Dec 29 16:44:40 jg kernel: fn 0 bar 2: mem 0x60013000-0x600137ff Dec 29 16:44:40 jg kernel: fn 0 bar 3: mem 0x60012000-0x600127ff Dec 29 16:44:40 jg kernel: fn 1 bar 1: io 0x480-0x487 Dec 29 16:44:40 jg kernel: fn 1 bar 2: mem 0x60011000-0x600117ff Dec 29 16:44:40 jg kernel: fn 1 bar 3: mem 0x60010000-0x600107ff Dec 29 16:44:40 jg kernel: fn 0 bar 1: io 0x400-0x47f Dec 29 16:44:40 jg kernel: fn 0 rom: mem 0x6000c000-0x6000ffff Dec 29 16:44:40 jg kernel: fn 1 rom: mem 0x60008000-0x6000bfff Dec 29 16:44:40 jg kernel: tulip_attach(bus 20, function 0) Dec 29 16:44:40 jg kernel: tulip.c:v0.91 4/14/99 becker@cesdis.gsfc.nasa.gov (mo dified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford) Dec 29 16:44:40 jg kernel: eth0: Xircom Cardbus Adapter (DEC 21143 compatible mo de) rev 3 at 0x400, 00:10:A4:FB:F6:70, IRQ 3. Dec 29 16:44:40 jg kernel: eth0: MII transceiver #0 config 3100 status 7809 adv ertising 01e1. Dec 29 16:44:40 jg kernel: serial_attach(bus 20, fn 1) Dec 29 16:44:40 jg kernel: tty02 at 0x0480 (irq = 3) is a 16550A Dec 29 16:44:40 jg cardmgr[374]: executing: './network start eth0' The contents of /var/state/pcmcia/stab: Socket 0: Xircom CardBus 10/100 Ethernet + 56K Modem 0 network tulip_cb 0 eth0 0 serial serial_cb 0 ttyS2 4 66 Socket 1: empty Output from cardctl: [root@jg pcmcia]# cardctl ident Socket 0: product info: "Xircom", "CardBus Ethernet 10/100 + Modem 56", "CBEM56G", "1.03" manfid: 0x0105, 0x0103 function: 6 (network) Socket 1: no product info available The transmit timeout message I got are the following: Dec 29 16:53:15 jg kernel: eth0: Transmit timed out, status 686980c7, CSR12 0000 00c2, resetting... Dec 29 16:53:50 jg last message repeated 7 times Dec 29 16:54:55 jg last message repeated 13 times Dec 29 16:56:00 jg last message repeated 13 times |
Messages