• Resolving installation and configuration problems
• PCMCIA network adapters

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Question: eth0: interrupt(s) dropped! messages by Rick Lerner, 1999, Nov 01

1. Re: Question: eth0: interrupt(s) dropped! messages by David Hinds, 1999, Nov 01

(_ Ok: do_scan did the trick by Rick Lerner, 1999, Nov 02

2. Question: Billionton LNA-100B by Markus Troebensberger, 1999, Nov 04

1. It is not a supported card, but... by David Hinds, 1999, Nov 04

1. Sad: I have testet ... by Markus Troebensberger, 1999, Nov 05

2. Question: It nearly works by Markus Troebensberger, 1999, Nov 08

1. So close yet so far? by David Hinds, 1999, Nov 20

2. News: first LNA-100B success by Miroslaw Kwasniak, 2000, Jun 30

3. Question: Kingmax? PCMCIA 10/100 adapter by Nathan Hartwell, 1999, Nov 06

1. Sad: These cards are not really NE2000 compatible by David Hinds, 1999, Nov 23

2. Idea: AX88190 (Kingmax, PCMIA 10/100 Ethernet Card) on kernel 2.2.x by Thomas Pasch, 2000, Jan 19

4. Compex/ReadyLINK 10Mbps Ethernet card: kernel `Oops' on insert by David, 1999, Nov 08

1. Re: Compex/ReadyLINK 10Mbps Ethernet card: kernel `Oops' on insert by David Hinds, 1999, Nov 08

5. Sad: upgrading PCMCIA 3.1.1 to 3.1.2 or 3.1.3 breaks certain network adapters by Patrick Hildenbrand, 1999, Nov 10

1. Ok: Fixed by Patrick Hildenbrand, 1999, Dec 06

6. Question: Keep receiving "register_netdev( ) failed: try again by Al Charpentier, 1999, Nov 13

1. Question: Nobody has any input? by Al Charpentier, 1999, Nov 20

1. I feel your pain.... by Nathan Hartwell, 1999, Nov 21

2. Note: This is an unusual message by David Hinds, 1999, Nov 23

1. register_netdev( ) failed: try again by Al Charpentier, 1999, Nov 25

7. Question: D-Link DFE-660 Problems by mike@enoch.org, 1999, Nov 15

1. Re: Question: D-Link DFE-660 Problems by David Hinds, 1999, Nov 15

(_ It works! Great! by mike@enoch.org, 1999, Nov 16

(_ They're documented in the man page by David Hinds, 1999, Nov 16

(_ Re: They're documented in the man page by Mike Johnson, 1999, Nov 16

8. Question: Destination Host Unreachable by David Walden, 1999, Nov 15

1. Network unreachable == routing problem by David Hinds, 1999, Nov 15

(_ RE: Network unreachable == routing problem by David Walden, 1999, Nov 17

(_ Another view on this problem by John Jervis, 2000, Jan 05

9. Question: Intel EtherExpress PRO/100 Cardbus 32 by Mike Rudgyard, 1999, Nov 17

1. The EEPROM isn't the problem by David Hinds, 1999, Nov 17

2. Question: More info... by Mike Rudgyard, 1999, Nov 18

1. Something to try... by David Hinds, 1999, Dec 30

... 2 Message(s)

3. Sad: Same thing happens with Intel PRO/100 LAN+Modem56 CardBus II card by Wayne Scott, 1999, Dec 07

1. It's the chipset by John Kilpatrick, 2000, Apr 22

10. Question: eth0 won't initialise on bootup. by James Bramich, 1999, Nov 18

1. need more information by Nathan Hartwell, 1999, Nov 21

2. Check the HOWTO... by David Hinds, 1999, Nov 22

11. Question: Kingmax 10/100 Mbps cardbus ethernet card, help? by Michael Kroes, 1999, Nov 26

12. Question: dynalink lc10 network can't initialise by digit@dds.nl, 1999, Nov 29

1. The actual messages would help by David Hinds, 1999, Nov 29

(_ messages for compaqua armada 1750 by digit@dds.nl, 1999, Nov 30

(_ No real problems here by David Hinds, 1999, Nov 30

(_ Thanks!! by digit@dds.nl, 1999, Dec 01

13. Question: DFE-650 only 10 Mbit? by tma@ppmedia.at, 1999, Nov 29

1. I don't really know by David Hinds, 1999, Nov 30

(_ Question: right. by tma@ppmedia.at, 1999, Nov 30

(_ Re: Question: right. by David Hinds, 1999, Nov 30

14. Question: LinkSys 10baseT "Network Everywhere" NP10T? by John Tunison, 1999, Dec 01

1. Feedback: More info... by John Tunison, 1999, Dec 06

(_ There isn't much you can do to fix install problems by David Hinds, 1999, Dec 14

(_ Ok: For others with a Vaio N505... by John Tunison, 1999, Dec 14

15. Question: RH6.1 505TR hangs returning from hibernate by Henry Hollenberg, 1999, Dec 03

1. This driver can't handle suspend/resume events by David Hinds, 1999, Dec 30

16. Question: Support for Intel PRO/100 CardbusII (MBLA3400) by Edwin van Ouwerkerk Moria, 1999, Dec 03

1. Not yet by David Hinds, 1999, Dec 03

17. Question: DHCP with PCMCIA by Christopher Keller, 1999, Dec 06

1. Not sure if this is Caldera specific by David Hinds, 1999, Dec 06

(_ Hate to say it, but even Red Hat is having trouble with DHCP and PCMCIA by Nathan Hartwell, 2000, Jan 17

(_ Don't be so sure! by David Hinds, 2000, Jan 17

(_ quite right....it wasn't a PCMCIA issue, but a DHCP issue by Nathan Hartwell, 2000, Jan 19

18. Question: Possible erroneous manfid in config file? by Brian Mays, 1999, Dec 13

1. Well, one of them is wrong... by David Hinds, 2000, Jan 14

19. Problems with 3c575 and CEM33 on an NEC Versa LX by Brian Mays, 1999, Dec 13

1. A favorable resolution on both counts by David Hinds, 1999, Dec 17

20. Warning: genius MF3000 different versions? by J. Schmid, 1999, Dec 29

1. More: kludge for partial functionality of genius MF3000 by J. Schmid, 2000, Jan 02

21. Question: NetGear FA510 ethernet card not recognized by Michael Bletzinger, 2000, Jan 05

1. The usual response: check your system log by David Hinds, 2000, Jan 06

(_ Feedback: Here are the logs by Michael Bletzinger, 2000, Jan 06

(_ Ok: Changing the address worked by Michael Bletzinger, 2000, Jan 10

22. Question: O2Micro(OZ6836/6860)+EtherFast=very slow network... by Max Gotlib, 2000, Jan 07

1. Note: Ugly workaround:-) by Dag Kröper, 2000, Jul 10

23. Question: Problems with Accton EN2220 by Volker Wendt, 2000, Jan 09

1. Need more messages by David Hinds, 2000, Jan 09

2. The usual mantra: more system log messages, please by David Hinds, 2000, Jan 10

3. might be tulip problem? by J. Schmid, 2000, Jan 11

24. Ok: New hw_info line for PCMCIA Technology OEM NE2000 Compatible by sampo@netc.pt, 2000, Jan 10

25. Question: Schemes problem by Ralf Eichmann, 2000, Jan 10

26. Idea: Problem and Workaround with dhcpcd by uffti, 2000, Jan 12

1. Odd changes by David Hinds, 2000, Jan 12

(_ yes it works by uffti, 2000, Jan 13

27. Sad: Vaio 505V + OvisLink LFS PCM32 doesn't work by Klaus Kudielka, 2000, Jan 18

1. Maybe try the latest beta? by David Hinds, 2000, Jan 21

(_ Sad: 18-Jan-00 doesn't help. by Klaus Kudielka, 2000, Jan 21

(_ Ok: 3.1.10 works by Klaus Kudielka, 2000, Feb 07

28. Question: Problems with Kingmax KEN0100-DF Ethernet card by Albio, 2000, Jan 20

1. Again... system log messages?? by David Hinds, 2000, Jan 20

(_ Note: Sys Log messages by Albio, 2000, Jan 21

(_ Driver upgrade? by David Hinds, 2000, Jan 22

(_ It doesn't work by Albio, 2000, Jan 22

(_ Re: It doesn't work by David Hinds, 2000, Jan 24

(_ It's doesn't work again. by Albio, 2000, Jan 28

(_ Ok: It works !!!! by Albio, 2000, Feb 05

29. Question: Socket EA System Hang by Robert Sanderson, 2000, Jan 21

1. Resource conflict? by David Hinds, 2000, Jan 21

(_ More: Resource Conflict, Socket EA by Robert Sanderson, 2000, Jan 24

(_ More: Socket EA hang, by Robert Sanderson, 2000, Jan 25

30. Question: Problems starting dhclient by Stefan Hahne, 1999, Dec 05

1. Check your system log, etc by David Hinds, 2000, Jan 05

31. Question: Trust Netlink Combi don't respond to ping by A. Bosio, 2000, Jan 06

1. The usual: system log messages?? by David Hinds, 2000, Jan 06

32. Question: Trouble with Linksys Ethernet Card by Mike, 2000, Jan 26

1. More system log messages? by David Hinds, 2000, Jan 27

33. Question: Dual PCMCIA NIC system (Linksys plus NDC ) time outs and lost interrupts by Dale moberg, 2000, Jan 29

1. Sounds like a classic interrupt conflict by David Hinds, 2000, Jan 30

(_ Ok: OK, I guess next time I will just ignore proc/interruptsI by Dale moberg, 2000, Jan 30

34. Question: Cardbus Tulip card works unreliably (system crash) by rolf.fiedler@ferrari.de, 2000, Feb 03

1. System log messages? by David Hinds, 2000, Feb 03

1. Feedback: sys log messages by rolf.fiedler@ferrari.de, 2000, Feb 04

2. More: detailed bug report by rolf.fiedler@ferrari.de, 2000, Feb 07

3. Warning: Problem resolved by rolf.fiedler@ferrari.de, 2000, Feb 08

35. Feedback: Problems compiling w/ kernels 2.3.43 and up by Mark Rasmussen, 2000, Feb 14

36. Note: Supported? by Alex Pearsall, 2000, Feb 15

37. Question: Argosy 10/100 EN-235 by Robert Rossmann, 2000, Feb 17

1. More: Argosy 10/100 more info by Robert Rossmann, 2000, Feb 17

(_ Re: More: Argosy 10/100 more info by David Hinds, 2000, Feb 17

(_ More: Used both tulip_cb and epic_cb by Robert Rossmann, 2000, Feb 18

(_ More: More info by Robert Rossmann, 2000, Feb 21

(_ You are currently out of luck by David Hinds, 2000, Feb 21

38. Question: I get "Network Unreachable" trying to ping others... by Captain Panic, 2000, Feb 17

39. Question: card works fine, but 'tcpdump' cant see any of the traffic by Ron Flory, 2000, Feb 17

1. More: Untitled by Ron Flory, 2000, Feb 17

40. Note: Problem with ADDTRON Fast Ethernet card by Andreas-Johann Ulvestad, 2000, Feb 17

1. It isn't an Intel network device by David Hinds, 2000, Feb 17

(_ More: Done that, doesn't work by Andreas-Johann Ulvestad, 2000, Feb 17

(_ More: af-680 ? by Poul Erik Laursen, 2000, Feb 18

1. That card is not a true NE2000 by David Hinds, 2000, Feb 18

2. Question: Someone got AF-680 (Addtron PCMCIA NIC) work? by Armando Montiel, 2000, Jul 10

... 2 Message(s)

41. Question: Beffalo LPC3-TX 10/100 NIC by Ian Bone, 2000, Feb 18

1. Bad kernel choice by David Hinds, 2000, Feb 18

42. Sad: ND5120-E Card seems to be alive, but cannot ping. by Martin Andrews, 2000, Feb 22

43. Question: Dynalink L100C32 not recognized by Jasper Spit, 2000, Feb 22

1. Wrong ID numbers by David Hinds, 2000, Feb 22

(_ Sad: No luck by Jasper Spit, 2000, Feb 22

44. Question: route add unnecessary for dhclient? by Adam Goode, 2000, Feb 24

1. I'm not sure by David Hinds, 2000, Feb 24

(_ Feedback: dhclient for Linux by Adam Goode, 2000, Feb 24

(_ Package name confusion, and a fix by David Hinds, 2000, Feb 24

(_ More: Hmmm, almost, but not quite by Adam Goode, 2000, Feb 24

(_ Argh by David Hinds, 2000, Feb 24

45. Question: Wisecom PC-400 10/100 - Doesn`t work by Francesc Bassas, 2000, Feb 24

1. The wrong driver is being loaded by David Hinds, 2000, Feb 24

(_ Sad: It fails anyway by Francesc Bassas, 2000, Feb 25

(_ Sorry, ignore that suggestion by David Hinds, 2000, Apr 04

46. News: NetGear FA410TXC Setup by Jochen Friedrich, 2000, Feb 24

47. Question: DFE-650 not always Linux-compatible? by Anthony Jameson, 2000, Feb 25

1. Idea: Try This by Jochen Friedrich, 2000, Feb 25

1. Feedback: Hope others can try by Anthony Jameson, 2000, Feb 26

... 4 Message(s)

2. Question: bad performance with Jochen's patch and DFE-650 by Ingo Ciechowski, 2000, Feb 26

... 9 Message(s)

2. Agree: NetGear FA410TXC Tool works for D-Link DE-650 by Ingo Ciechowski, 2000, Feb 26

1. Angry: HELP! *Still* can't get D-Link DFE-650TX going! (Day 5) by Harold Boyer, 2000, Aug 18

... 1 Message(s)

48. Question: D-Link DE-650 PCMCIA ethernet card by Phil Brooke, 2000, Feb 25

1. Maybe a bad card?? by David Hinds, 2000, Feb 25

1. Note: Possibly... by Phil Brooke, 2000, Feb 27

... 1 Message(s)

2. Idea: can you try it under Windows? by Ingo Ciechowski, 2000, Feb 27

49. Idea: Nit in 3.0.14 pcmcia/network script by Glen Ditchfield, 2000, Feb 26

1. You're right by David Hinds, 2000, Feb 28

50. Sad: eth0: Tx hung, 11 vs. 0. error with Abocom FE2000 and similar with D-Link DFE-650 cards by Ingo Ciechowski, 2000, Feb 26

1. News: D-Link DFE-650 problem solved - FE2000 still not working by Ingo Ciechowski, 2000, Feb 26

52. Idea: Fiberline FL-4680 working! by CW Zuckschwerdt, 2000, Feb 28

53. Question: No success with either 10/100 Etherjet nor 3Com cards on Thinkpad by lyle borg-graham, 2000, Mar 01

1. More: Addendum by lyle borg-graham, 2000, Mar 01

2. This is a configuration error by David Hinds, 2000, Mar 01

1. Progress, but... by lyle borg-graham, 2000, Mar 01

54. Question: CardBus and Product Info by Sergio Talens-Oliag, 2000, Mar 01

1. Re: Question: CardBus and Product Info by David Hinds, 2000, Mar 06

(_ News: Dynalink L100C32 and Product Info by Sergio Talens-Oliag, 2000, Mar 07

55. Question: Best PC Card Ethernet Interface for 10/100, DHCP under RH6.1 by Dave Aiello, 2000, Mar 07

56. Question: Thinkpad 600E and IBM etherjet 100/10 by Andrew Fong, 2000, Mar 11

1. More: I dont get lights by Andrew Fong, 2000, Mar 11

2. More information? by David Hinds, 2000, Mar 13

57. Question: Argosy EN-235 continued. by Robert Rossmann, 2000, Mar 15

1. That doesn't look so good to me by David Hinds, 2000, Mar 15

(_ More: No wrong HW address by Robert Rossmann, 2000, Mar 16

(_ So it isn't a tulip at all by David Hinds, 2000, Mar 16

58. Question: Unsupported Tulip card only works with DHCP by Mike McDonald, 2000, Mar 18

1. I know it isn't a real solution... by David Hinds, 2000, Apr 28

59. Question: trouble with netgear FA410TXC by Matthew Austin, 2000, Mar 23

1. Feedback: Hardware Version by Jochen Friedrich, 2000, Mar 25

1. Sad: tried code but no go, MAC address within problem range by Matthew Austin, 2000, Mar 27

... 4 Message(s)

2. Question: 410TXC and OpenBSD by Morgan Neubauer, 2000, Mar 26

60. Question: Using regular kernel tulip driver with pcmcia-cs by RichardA, 2000, Mar 31

1. Configuration on 2.3.* by David Hinds, 2000, Mar 31

61. Question: KingMax 10/100 Ethernet by Ryan Marquis, 2000, Apr 04

1. Not in the immediate future by David Hinds, 2000, Apr 04

62. Question: Possible need for a FORWARDING="y/n" setting by Dagmar d'Surreal, 2000, Apr 05

1. Another way to do it: use start_fn() by David Hinds, 2000, Apr 05

(_ Note: Untitled by Dagmar d'Surreal, 2000, Apr 06

63. Question: IBM ethernet card don't work by borg1, 2000, Apr 07

1. Maybe a resource conflict by David Hinds, 2000, Apr 07

64. Question: SMC EZ CardBus 10/100 PC Card by Andreas-Johann Ulvestad, 2000, Apr 09

1. Wrong driver; also, don't list PCMCIA drivers in conf.modules by David Hinds, 2000, Apr 10

(_ More: hmm....ok? by Andreas-Johann Ulvestad, 2000, Apr 10

(_ Check your system log by David Hinds, 2000, Apr 10

65. Angry: Intel EtherExpress PRO/100 Mobile, model MBLA3200 by Jim Perry, 2000, Apr 09

1. Ok: EtherExpress fixed! by Jim Perry, 2000, Apr 15

(_ Agree: That fixes my card too. But the EEPROM rewrite seems essential. by Kurt Atkinson, 2000, May 24

66. Question: DHCP and manually set MAC address by Andreas Hotz, 2000, Apr 12

1. There has got to be another way by David Hinds, 2000, Apr 12

1. More: I agree, however... by Andreas Hotz, 2000, Apr 13

... 1 Message(s)

2. Ok: It works! by Andreas Hotz, 2000, Apr 17

67. Sad: Toshiba+TDK Ethernet+SuSe -> SIOCSIFADRR unknown device by Alexei Gorbatov, 2000, Apr 12

1. System log messages, please? by David Hinds, 2000, Apr 12

1. Sad: log message by Alexei Gorbatov, 2000, Apr 13

2. Unsupported card by David Hinds, 2000, Apr 13

1. More: Xircom by Alexei Gorbatov, 2000, Apr 14

68. Question: kernel: eth0: transmit timed out, tx_status 00 status e000. by Bernard BARBIER, 2000, Apr 11

69. Sad: eth0:interrupt(s) dropped! by Ray, 2000, Mar 31

1. So give us a hint: what brand and model of card is this? by David Hinds, 2000, Mar 31

(_ Feedback: laplop manufactured in China. & my config files by Ray, 2000, Apr 01

(_ I'm afraid you are out of luck for now by David Hinds, 2000, Apr 03

(_ Ok: I'll be waiting for your new drivers...:) by Ray, 2000, Apr 04

70. Question: Problem with IBM 10/100 Etherjet Cardbus Adapter by Torsten Tittmann, 2000, Apr 18

71. Question: Problem with IBM token ring driver and 3c389 by Rogan Dawes, 2000, Apr 18

1. See /etc/pcmcia/config.opts by David Hinds, 2000, Apr 18

72. Problem with Fiberline PCM-FE1500 Fast Ethernet card by thimo.e@digithi.han.de, 2000, Apr 22

1. No error messages? Then I'm not sure. by David Hinds, 2000, Apr 24

(_ Ok: possible Half/Fullduplex problem by thimo.e@digithi.han.de, 2000, Apr 25

73. Question: Anyone getting the Intel PRO/100 LAN+Modem56 Cardbus II to work? by John Kilpatrick, 2000, Apr 22

74. Sad: Bizarre Linksys NP100 problem by Larry Carter, 2000, Apr 23

1. Idea: Look at #46 and #47 by Jochen Friedrich, 2000, Apr 23

1. Sad: Didn't seem to help. by Larry Carter, 2000, Apr 23

... 2 Message(s)

2. Angry: Bad card!!! by Larry Carter, 2000, Apr 24

75. Slow connections with Genius MF3000 ? by Thomas Moestl, 2000, Apr 27

1. I don't know if this is unusual by David Hinds, 2000, Jun 03

(_ Question: Seems to be an issue with my notebook by Thomas Moestl, 2000, Jun 03

76. Question: Multicast and promisc issues by David Shaw, 2000, Apr 27

1. I'm afraid it probably isn't tested much by David Hinds, 2000, Apr 27

(_ Re: I'm afraid it probably isn't tested much by David Shaw, 2000, Apr 27

(_ I don't think I can explain that by David Hinds, 2000, Apr 27

77. Question: DFE660tx-problems with non-auto-negotiation by Christian Froemmel, 2000, Apr 28

1. It isn't clear to me if you have a problem by David Hinds, 2000, Apr 28

78. Ok: Success with NetGear FA510C by Chris Love, 2000, Apr 30

79. Question: 2 PCMCIA cards in one laptop. Help please... by J Toy, 2000, Apr 30

1. Sounds like a fishy test procedure by David Hinds, 2000, May 01

2. Feedback: Setting another MAC address is no problem by Andreas Hotz, 2000, May 05

80. Question: setting ethernet PCMCIA address by J Toy, 2000, May 01

1. Don't know why you need it, but here it is by David Hinds, 2000, May 01

2. Feedback: Setting the hardware address from network.opts by Andreas Hotz, 2000, May 05

81. Question: LANPRO Realtek 8139 B/C supported? by Gabriele Paciucci, 2000, May 03

1. Not currently supported by David Hinds, 2000, May 03

1. Re: Not currently supported by Gabriele Paciucci, 2000, May 03

2. Question: Unidentified PCMCIA Card (mayby Realtek) by Gregor Suhr, 2000, Jun 28

1. I'd go ahead and try it out by David Hinds, 2000, Jul 06

82. Question: Hw. address read/write mishap 2 with i1500 and IBM Ethernet II by Tim Gerla, 2000, May 09

1. Need to narrow down where the problem appears by David Hinds, 2000, May 09

83. Question: OZ6832: "eth0: interrupt(s) dropped!" by Axel Thimm, 2000, May 09

1. Re: Question: OZ6832: "eth0: interrupt(s) dropped!" by David Hinds, 2000, May 11

84. Question: Has anyone successfully compiled Kingmax-10/100 modified sources under 2.2.x? by Carlos Betancourt, 2000, May 10

1. Sad: Untitled by Chris Lo, 2000, Jun 09

(_ I wouldn't hold your breath by David Hinds, 2000, Jun 09

85. Question: Genius MF3000 stalls 3.1.14 by Philip Martin, 2000, May 16

1. I think I need a bit more information by David Hinds, 2000, Jun 06

(_ Re: I think I need a bit more information by Philip Martin, 2000, Jun 06

86. Sad: When will pcnet_cs work with Asix AX88190 Chipset? by Ray, 2000, May 24

1. We're working on it by David Hinds, 2000, May 25

1. Ok: Thank u. by Ray, 2000, May 26

2. Note: It works with 3.1.15 by Carlos Betancourt, 2000, Jun 09

87. Question: O2Micro OZ6836: Extremly slow Ethernet-Card by Dag Kröper, 2000, May 31

1. The messages look good by David Hinds, 2000, May 31

1. Re: The messages look good by Dag Kröper, 2000, Jun 02

2. Idea: Solve Problem :-) by Dag Kröper, 2000, Jul 10

88. Question: Question about epic_cb driver by Brian Mays, 2000, Jun 02

1. The epic_cb driver got broken in 2.2.15 by David Hinds, 2000, Jun 02

(_ Re: The epic_cb driver got broken in 2.2.15 by Brian Mays, 2000, Jun 02

89. Feedback: Corega 10M EtherII PCC-T failed detection by Michael Fitzpatrick, 2000, Jun 03

1. Apologies by Michael Fitzpatrick, 2000, Jun 03

90. Question: Abocom FE1500 supported ??? by Julien, 2000, Jun 06

1. Probably the wrong place to ask by David Hinds, 2000, Jun 06

(_ Ok: FE-1500 works !!! by Julien, 2000, Jun 26

91. Question: OvisLink LFS-PCM-32 not working unless in promiscous mode by Miguel, 2000, Jun 13

1. You may have to live with that for now by David Hinds, 2000, Jun 14

92. Minor mistake in /etc/pcmcia/network script by Brian Mays, 2000, Jun 15

1. Hmmm... by David Hinds, 2000, Jun 15

93. Sad: invalid operand: 0000 by Nuitari, 2000, Jun 24

94. Sad: Again: eth0: interrupt(s) dropped! by Michael Brandt, 2000, Jun 26

1. This network chipset isn't supported for the moment by David Hinds, 2000, Jul 05

95. Question: No such file or directory? by John Cusick, 2000, Jun 28

1. Update the PCMCIA init script... by David Hinds, 2000, Jul 05

(_ Feedback: Readonly Variable? by John Cusick, 2000, Jul 06

(_ That message is not an error by David Hinds, 2000, Jul 06

(_ Feedback: Other message is "failed services" by John Cusick, 2000, Jul 06

(_ Note: Intel CardBus 32 Works! by John Cusick, 2000, Jul 07

96. Note: Addition to config file for IBM EtherJet/Modem combo by Peter A. Friend, 2000, Jul 03

97. Question: Question about Compex Linkport card. by Alexandr Berezniatsky, 2000, Jul 06

1. You can check for yourself by David Hinds, 2000, Jul 06

98. Sad: Problems with Compex Linkport by Alexandr Berezniatsky, 2000, Jul 09

1. Need more info by David Hinds, 2000, Jul 10

(_ Note: additional info by Alexandr Berezniatsky, 2000, Jul 10

(_ Re: Note: additional info by David Hinds, 2000, Jul 10

(_ Ok: Thanks!!!!:) by Alexandr Berezniatsky, 2000, Jul 11

99. Question: Psion Gold Card 10-100Mb onto Toshiba(!) 310CDS with Redhad 6.1 by Mike Jones, 2000, Jul 14

1. Your card is not the same by David Hinds, 2000, Jul 14

(_ More: It pretends to be a netglobal card. by Mike Jones, 2000, Jul 14

(_ Re: More: It pretends to be a netglobal card. by David Hinds, 2000, Jul 14

(_ Note: smb91c92_cs failed with "exclude port 0x100-0x1ff" by Mike Jones, 2000, Jul 14

(_ More: No joy yet, small progress by Mike Jones, 2000, Jul 16

(_ Oh, of course... by David Hinds, 2000, Jul 17

(_ Sad: Not Jack of Diamonds ... I thought: 7 of Diamonds (but looks like I'm Wrong) by Mike Jones, 2000, Jul 24

(_ More: Summary of what I've done so far (that's not worked) by Mike Jones, 2000, Jul 25

(_ Ok: Got it to work Fix enclosed... by Mike Jones, 2000, Jul 27

100. Question: Failure to recognise D-Link DE650 by Mike Dwerryhouse, 2000, Jul 17

101. Question: Hamlet FE1500 poor performance problem. by Alessandro De Salvo, 2000, Jul 18

1. Need more detailed information by David Hinds, 2000, Jul 18

(_ More informations... by Alessandro De Salvo, 2000, Jul 18

(_ Syslog dump by Alessandro De Salvo, 2000, Jul 20

(_ Maybe a driver upgrade will help by David Hinds, 2000, Jul 20

(_ Upgrade done, but nothing different... by Alessandro De Salvo, 2000, Jul 21

(_ Back to kernel 2.2.16-3. by Alessandro De Salvo, 2000, Jul 21

(_ More syslog + other infos by Alessandro De Salvo, 2000, Jul 21

(_ The problem appears to be only in RX by Alessandro De Salvo, 2000, Jul 24

102. Sad: Strange 10/100 card Allied Telesyn 2800TX by Mircea Ciocan, 2000, Jul 21

1. Just edit /etc/pcmcia/config by David Hinds, 2000, Jul 21

103. Sad: MELCO LPC3-TX "eth0: interrupt(s) dropped!" by Gary Chan, 2000, Jul 23

1. It is more than an interrupt issue by David Hinds, 2000, Jul 24

(_ Ok: Will it be supported in the near future? by Gary Chan, 2000, Jul 25

(_ Nope by David Hinds, 2000, Jul 25

104. Sad: Network card doesn't work after warm boot Win98->Linux by Bernd Eggink, 2000, Jul 24

1. I think this is fixed in the 3.1.19 drivers by David Hinds, 2000, Jul 24

105. Question: NE2000 Compatible Fast Ethernet says: get dev info on socket 1 failed: No such device by Baltasar Parreira, 2000, Jul 30

106. "eth0: Tx hung, 9 vs 0." from NETGEAR FA510c by David Brooks, 2000, Aug 02

1. Interrupt setup problem by David Hinds, 2000, Aug 02

1. Ok: Problem solved; card working! by David Brooks, 2000, Aug 03

2. Question: Another Netgear FA510c problem by Ed Hill, 2000, Aug 08

107. Question: DLink DFE 660 - Bad performance by hvx@cryptnet.de, 2000, Aug 02

1. First guess: problem negotiating correct media type by David Hinds, 2000, Aug 02

(_ Feedback: thanks, but it didnt work by hvx@cryptnet.de, 2000, Aug 02

(_ Re: Feedback: thanks, but it didnt work by David Hinds, 2000, Aug 02

(_ Feedback: Re: Feedback: thanks, but it didnt work by hvx@cryptnet.de, 2000, Aug 02

108. Angry: pcnet_cs, card works. SLOW! by jguerin@home.com, 2000, Aug 04

109. Ok: Toshiba Satellite Pro 4200 series, Micronet SP162A ethernet card, Redhat 6.2 - Some thoughts by David Martin, 2000, Aug 04

110. Warning: FYI Linksys PCMPC200 V2 card; different from older versions by Nik Conwell, 2000, Aug 06

111. 3COM 3CXFE575BT sending with no flow control? by Roberto Jung Drebes, 2000, Aug 07

1. It is not a flow control issue by David Hinds, 2000, Aug 08

(_ Re: It is not a flow control issue by Roberto Jung Drebes, 2000, Aug 08

112. Question: 3c574 prob, no h/w address by Joerg Schmitz-Linneweber, 2000, Aug 08

1. This is the wrong driver by David Hinds, 2000, Aug 08

113. Question: Psion GoldCard Cardbus Network adapter problem with Mandrake 7.1 by Jan Calmered, 2000, Aug 10

1. IO port allocation problem by David Hinds, 2000, Aug 10

(_ Feedback: Thanks, allocating more IO helped by Jan Calmered, 2000, Aug 14

(_ Question: To quick to be happy, seems to have some IRQ problem still by Jan Calmered, 2000, Aug 14

(_ Try some other irq_mode values by David Hinds, 2000, Aug 14

(_ Tried irq_mode=3 and got it to stop complaining about IRQ9 but still not OK by Jan Calmered, 2000, Aug 16

(_ Several issues by David Hinds, 2000, Aug 16

(_ Ok: Ethernet working using 3.1.20 release, still some minor problems by Jan Calmered, 2000, Aug 17

114. Question: Can use card only once by Maik Hassel, 2000, Aug 13

1. Not enough information to tell anything by David Hinds, 2000, Aug 16

1. Here it is.... by Maik Hassel, 2000, Aug 16

... 3 Message(s)

2. Done - no difference by Maik Hassel, 2000, Sep 05

115. Question: IBM EtherJet combo only works after bouncing eth0 by Peter A. Friend, 2000, Aug 16

116. Question: DFE-650 Cannot read hardware net address by Ben Marsh, 2000, Aug 22

1. Your workaround didn't work by David Hinds, 2000, Aug 22

117. Question: intel pro 10/100/56k combo card by Tim Newsham, 2000, Aug 22

1. You can't fix this by editing the config file by David Hinds, 2000, Aug 22

(_ Re: You can't fix this by editing the config file by Tim Newsham, 2000, Aug 23

118. Question: Misidentifying 'D-Link DFE-650' as 'KTI Ether-C16' by William Crandall, 2000, Aug 22

1. The correct driver *is* loaded by David Hinds, 2000, Aug 22

119. Question: Compex Linkport/TX32 and EEPROM by Marco Dubbeld, 2000, Aug 26

1. "Tx Hung" often means an interrupt delivery problem by David Hinds, 2000, Aug 28

(_ more info Compex TX32, "Tx hung" problem by Marco Dubbeld, 2000, Aug 29

(_ Wait a second: this is not the right driver! by David Hinds, 2000, Sep 01

120. Feedback: Addition to pcmcia/config file required. by Rudi Heitbaum, 2000, Aug 27

121. Sad: 2.4.0 test 7 broke pcnet_cs by Heather Stern, 2000, Aug 28

1. Makefile bug by David Hinds, 2000, Sep 01

122. Question: Dynalink LC100-32-2 by Mitsuo, 2000, Aug 30

123. Question: Silicom pcmcia drivers: make error ? by Graham FennerBarbour, 2000, Nov 24

[ Add Message ]  to: "PCMCIA Network Adapter Issues"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]