Next-in-Thread Next Message

Ok do_scan did the trick 

Forum: PCMCIA Network Adapter Issues
Re: Question eth0: interrupt(s) dropped! messages (Rick Lerner)
Re: None Re: Question: eth0: interrupt(s) dropped! messages (David Hinds)
Date: 1999, Nov 02
From: Rick Lerner rlerner

Thanks David,

Adding do_scan=0 to /etc/sysconfig/pcmcia did the trick.
It now picks IRQ 3 and I do not get any "interrupt(s) dropped!" messages.

Other than 3c589_cs moving from IRQ 10 to 3, /proc/interrupts was unaffected by this change.


Next-in-Thread Next Message

Select this message: do_scan did the trick

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]