[ Next-in-Thread ]  [ Next Message ] 

Back to kernel 2.2.16-3. 

Forum: PCMCIA Network Adapter Issues
Re: Question: Hamlet FE1500 poor performance problem. (Alessandro De Salvo)
Re: Need more detailed information (David Hinds)
Re: More informations... (Alessandro De Salvo)
Re: Syslog dump (Alessandro De Salvo)
Re: Maybe a driver upgrade will help (David Hinds)
Re: Upgrade done, but nothing different... (Alessandro De Salvo)
Date: 2000, Jul 21
From: Alessandro De Salvo desalvo

Now I'm back to the kernel version 2.2.16-3 (RH 6.2) and the PCMCIA cardmgr now shows the correct version! Anyway the syslog dump is: 

Jul 21 19:57:53 ads pcmcia: Starting PCMCIA services: 
Jul 21 19:57:53 ads pcmcia:  modules 
Jul 21 19:57:53 ads pcmcia:  cardmgr. 
Jul 21 19:57:53 ads rc: Starting pcmcia succeeded 
Jul 21 19:57:53 ads cardmgr[179]: starting, version is 3.1.19 
Jul 21 19:57:53 ads portmap: portmap startup succeeded 
Jul 21 19:57:53 ads sysctl: net.ipv4.ip_forward = 0 
Jul 21 19:57:53 ads sysctl: net.ipv4.conf.all.rp_filter = 1 
Jul 21 19:57:53 ads sysctl: net.ipv4.ip_always_defrag = 0 
Jul 21 19:57:53 ads sysctl: kernel.sysrq = 0 
Jul 21 19:57:53 ads network: Setting network parameters succeeded 
Jul 21 19:57:54 ads cardmgr[179]: initializing socket 0 
Jul 21 19:57:54 ads cardmgr[179]: executing: 'modprobe 8390' 
Jul 21 19:57:54 ads cardmgr[179]: executing: './network start eth0' 
Jul 21 19:57:54 ads network: Bringing up interface lo succeeded 
Jul 21 19:57:54 ads network: Bringing up interface eth0 succeeded

i.e., again, no errors, no warnings... and transfer rate always the same! 

	Alex

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. More syslog + other infos by Alessandro De Salvo, 2000, Jul 21
(_ The problem appears to be only in RX by Alessandro De Salvo, 2000, Jul 24

[ Add Message ]  to: "Back to kernel 2.2.16-3."

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]