Next-in-Thread Next Message

Sad MELCO LPC3-TX "eth0: interrupt(s) dropped!" 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Jul 23
From: Gary Chan gchan1

The problem of "eth0: interrupt(s) dropped!" cannot be solved.
I have already tried all the possible solution.
I tried all "irq" and used "do_scan=0" parameters.

I love LINUX and don't want to use MS-Window any more.
PLease help me.
Many thanks.

Hardware:
LAN Card: Buffalo MELCO LPC3-TX PCMCIA NIC 10/100.
Laptop  : NEC VERSA NOTE

The following is syslog dump.
----------------------------------------------
Jul 23 10:00:46 localhost kernel:   kernel build: 2.2.14-1mdklinus #1 Tue Jan 4 21:39:25 CET 2000 
Jul 23 10:00:46 localhost kernel:   options:  [pci] [cardbus] [apm] 
Jul 23 10:00:46 localhost kernel: PCI routing table version 1.0 at 0xfdf70 
Jul 23 10:00:46 localhost kernel: Intel PCIC probe:  
Jul 23 10:00:46 localhost kernel:   TI 1221 rev 00 PCI-to-CardBus at slot 00:0a, mem 0x68000000 
Jul 23 10:00:46 localhost kernel:     host opts [0]: [serial pci & irq] [pci irq 10] [lat 168/176] [bus 32/34] 
Jul 23 10:00:46 localhost kernel:     host opts [1]: [serial pci & irq] [pci irq 10] [lat 168/176] [bus 35/37] 
Jul 23 10:00:46 localhost kernel:     ISA irqs (default) = 3,4,7,9,11 PCI status changes 
Jul 23 10:00:46 localhost cardmgr[3198]: starting, version is 3.1.19
Jul 23 10:00:46 localhost cardmgr[3198]: watching 2 sockets
Jul 23 10:00:46 localhost kernel: cs: IO port probe 0x0100-0x03ff: excluding 0x378-0x37f 
Jul 23 10:00:47 localhost cardmgr[3198]: initializing socket 0
Jul 23 10:00:47 localhost kernel: cs: memory probe 0xa000000-0xa0fffff: clean. 
Jul 23 10:00:47 localhost cardmgr[3198]: socket 0: Melco LPC3-TX Fast Ethernet
Jul 23 10:00:47 localhost cardmgr[3198]: executing: 'modprobe 8390'
Jul 23 10:00:47 localhost cardmgr[3198]: executing: 'modprobe pcnet_cs'
Jul 23 10:00:47 localhost kernel: eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:A0:0C:43:70:AA 
Jul 23 10:00:47 localhost cardmgr[3198]: executing: './network start eth0'
Jul 23 10:00:49 localhost kernel: eth0: interrupt(s) dropped! 
Jul 23 10:00:49 localhost kernel: eth0: Reentering the interrupt handler! isr=0x0 imr=0x0. 
Jul 23 10:00:50 localhost last message repeated 3 times
Jul 23 10:00:54 localhost kernel: eth0: interrupt(s) dropped! 
Jul 23 10:00:54 localhost kernel: eth0: Reentering the interrupt handler! isr=0x0 imr=0x0. 
Jul 23 10:01:00 localhost PAM_pwdb[3224]: (su) session opened for user news by (uid=0)
Jul 23 10:01:00 localhost PAM_pwdb[3224]: (su) session closed for user news
Jul 23 10:01:00 localhost kernel: eth0: interrupt(s) dropped! 
Jul 23 10:01:00 localhost kernel: eth0: Reentering the interrupt handler! isr=0x0 imr=0x0. 
Jul 23 10:01:13 localhost kernel: eth0: interrupt(s) dropped! 
Jul 23 10:01:13 localhost kernel: eth0: Reentering the interrupt handler! isr=0x0 imr=0x0. 
Jul 23 10:01:39 localhost kernel: eth0: interrupt(s) dropped! 
Jul 23 10:01:39 localhost kernel: eth0: Reentering the interrupt handler! isr=0x0 imr=0x0. 
Jul 23 10:01:47 localhost dhcpcd[3217]: timed out waiting for a valid DHCP server response 
Jul 23 10:01:47 localhost cardmgr[3198]: start cmd exited with status 1
------------------------------------------



Best regards.

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None It is more than an interrupt issue by David Hinds, 2000, Jul 24
(_ Ok Will it be supported in the near future? by Gary Chan, 2000, Jul 25
(_ None Nope by David Hinds, 2000, Jul 25

Add Message to: "MELCO LPC3-TX "eth0: interrupt(s) dropped!""

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10