Next-in-Thread Next Message

Sad MELCO LPC3-TX "eth0: interrupt(s) dropped!" 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Jul 23
From: Gary Chan gchan1

The problem of "eth0: interrupt(s) dropped!" cannot be solved.
I have already tried all the possible solution.
I tried all "irq" and used "do_scan=0" parameters.

I love LINUX and don't want to use MS-Window any more.
PLease help me.
Many thanks.

Hardware:
LAN Card: Buffalo MELCO LPC3-TX PCMCIA NIC 10/100.
Laptop  : NEC VERSA NOTE

The following is syslog dump.
----------------------------------------------
Jul 23 10:00:46 localhost kernel:   kernel build: 2.2.14-1mdklinus #1 Tue Jan 4 21:39:25 CET 2000 
Jul 23 10:00:46 localhost kernel:   options:  [pci] [cardbus] [apm] 
Jul 23 10:00:46 localhost kernel: PCI routing table version 1.0 at 0xfdf70 
Jul 23 10:00:46 localhost kernel: Intel PCIC probe:  
Jul 23 10:00:46 localhost kernel:   TI 1221 rev 00 PCI-to-CardBus at slot 00:0a, mem 0x68000000 
Jul 23 10:00:46 localhost kernel:     host opts [0]: [serial pci & irq] [pci irq 10] [lat 168/176] [bus 32/34] 
Jul 23 10:00:46 localhost kernel:     host opts [1]: [serial pci & irq] [pci irq 10] [lat 168/176] [bus 35/37] 
Jul 23 10:00:46 localhost kernel:     ISA irqs (default) = 3,4,7,9,11 PCI status changes 
Jul 23 10:00:46 localhost cardmgr[3198]: starting, version is 3.1.19
Jul 23 10:00:46 localhost cardmgr[3198]: watching 2 sockets
Jul 23 10:00:46 localhost kernel: cs: IO port probe 0x0100-0x03ff: excluding 0x378-0x37f 
Jul 23 10:00:47 localhost cardmgr[3198]: initializing socket 0
Jul 23 10:00:47 localhost kernel: cs: memory probe 0xa000000-0xa0fffff: clean. 
Jul 23 10:00:47 localhost cardmgr[3198]: socket 0: Melco LPC3-TX Fast Ethernet
Jul 23 10:00:47 localhost cardmgr[3198]: executing: 'modprobe 8390'
Jul 23 10:00:47 localhost cardmgr[3198]: executing: 'modprobe pcnet_cs'
Jul 23 10:00:47 localhost kernel: eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:A0:0C:43:70:AA 
Jul 23 10:00:47 localhost cardmgr[3198]: executing: './network start eth0'
Jul 23 10:00:49 localhost kernel: eth0: interrupt(s) dropped! 
Jul 23 10:00:49 localhost kernel: eth0: Reentering the interrupt handler! isr=0x0 imr=0x0. 
Jul 23 10:00:50 localhost last message repeated 3 times
Jul 23 10:00:54 localhost kernel: eth0: interrupt(s) dropped! 
Jul 23 10:00:54 localhost kernel: eth0: Reentering the interrupt handler! isr=0x0 imr=0x0. 
Jul 23 10:01:00 localhost PAM_pwdb[3224]: (su) session opened for user news by (uid=0)
Jul 23 10:01:00 localhost PAM_pwdb[3224]: (su) session closed for user news
Jul 23 10:01:00 localhost kernel: eth0: interrupt(s) dropped! 
Jul 23 10:01:00 localhost kernel: eth0: Reentering the interrupt handler! isr=0x0 imr=0x0. 
Jul 23 10:01:13 localhost kernel: eth0: interrupt(s) dropped! 
Jul 23 10:01:13 localhost kernel: eth0: Reentering the interrupt handler! isr=0x0 imr=0x0. 
Jul 23 10:01:39 localhost kernel: eth0: interrupt(s) dropped! 
Jul 23 10:01:39 localhost kernel: eth0: Reentering the interrupt handler! isr=0x0 imr=0x0. 
Jul 23 10:01:47 localhost dhcpcd[3217]: timed out waiting for a valid DHCP server response 
Jul 23 10:01:47 localhost cardmgr[3198]: start cmd exited with status 1
------------------------------------------



Best regards.

Next-in-Thread Next Message

Select this message: MELCO LPC3-TX "eth0: interrupt(s) dropped!"

Messages Inline: 1 All Outline: 1 2 All

1. None It is more than an interrupt issue by David Hinds, 2000, Jul 24
(_ Ok Will it be supported in the near future? by Gary Chan, 2000, Jul 25
(_ None Nope by David Hinds, 2000, Jul 25

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]