Next-in-Thread Next Message

None Interrupt setup problem 

Forum: PCMCIA Network Adapter Issues
Re: None "eth0: Tx hung, 9 vs 0." from NETGEAR FA510c (David Brooks)
Date: 2000, Aug 02
From: David Hinds <>

No interrupts are getting through from the card.  It is a problem with
the CardBus bridge configuration, not a problem with the card.

Could you post the output of the "dump_pirq" script from the
debug-tools subdirectory of the PCMCIA package?

I suspect it won't help, but you could also try bumping the card onto
a different interrupt by excluding irq 3 in /etc/pcmcia/config.opts.

-- Dave

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. Ok Problem solved; card working! by David Brooks, 2000, Aug 03
2. Question Another Netgear FA510c problem by Ed Hill, 2000, Aug 08

Add Message to: "Interrupt setup problem"

Members Subscribe Admin Mode Show Frames Help for HyperNews at 1.10