Next-in-Thread Next Message

Feedback thanks, but it didnt work 

Forum: PCMCIA Network Adapter Issues
Re: Question DLink DFE 660 - Bad performance
Re: None First guess: problem negotiating correct media type (David Hinds)
Date: 2000, Aug 02
From: hvx

> Maybe the card is confused about whether this is a full or half duplex
> link.  

Thats what I though, too, since the LED saying Half/Full Duplex always goes on and off when there is traffic.

> What sort of device are you connecting to? Hub or switch?

Its a micronet switch.

> Do
> you know if it supports autonegotiation?

I have no documentation, so I dont - any way to figure it out ?

> Try adding to /etc/pcmcia/config.opts a line like
> 
>      module "tulip_cb" opts "options=N"

If I do so, the card wont work at all. Even if I put "11" in there, which is the mode the card is usually in, it wont work. The logs dont say much besides

eth0: Using user-specified media MII

and I got a

kernel: eth0: Tx hung, 29 vs. 11.

a few times. Anything else I can try ? thanks, M.Melms

Next-in-Thread Next Message

Select this message: thanks, but it didnt work

Messages Inline: 1 All Outline: 1 2 All

1. None Re: Feedback: thanks, but it didnt work by David Hinds, 2000, Aug 02
(_ Feedback Re: Feedback: thanks, but it didnt work by hvx@cryptnet.de, 2000, Aug 02

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]