Next-in-Thread Next Message

Feedback Re: Feedback: thanks, but it didnt work 

Forum: PCMCIA Network Adapter Issues
Re: Question DLink DFE 660 - Bad performance
Re: None First guess: problem negotiating correct media type (David Hinds)
Re: Feedback thanks, but it didnt work
Re: None Re: Feedback: thanks, but it didnt work (David Hinds)
Date: 2000, Aug 02
From: hvx

> Do you ever get this message in normal operation (with no 
> module
> options)? 

no, never.

>  Can you show more of your PCMCIA startup messages (the PCIC
> probe, etc)?

like when I start cardmgr ? This would be:

Aug  2 23:19:51 bobby cardmgr[1741]: starting, version is 3.1.19
Aug  2 23:19:51 bobby cardmgr[1741]: watching 2 sockets
Aug  2 23:19:51 bobby kernel: cs: IO port probe 0x1000-0x17ff: clean.
Aug  2 23:19:51 bobby kernel: cs: IO port probe 0x0100-0x04ff: clean.
Aug  2 23:19:51 bobby kernel: cs: IO port probe 0x0a00-0x0aff: clean.

> Is the 200 kb/sec in both directions?

no, its worse ;-) I logged into our server via FTP. When I put a file I get 200K/s When I get a file I get 5 k/s

I noticed that the longer the download takes, the slower the LEDs blink - speed goes down.

>  Does "ifconfig" show lots of
> errors of any sort?
>

 TX packets:888 errors:14 dropped:0 overruns:0 carrier:14
                  collisions:0 txqueuelen:100 

Thats all, after a few MBs traffic.

> Are you using a good (i.e., Category 5) 100baseT cable?

Very good ones. Thanks, M.Melms

Next-in-Thread Next Message

Select this message: Re: Feedback: thanks, but it didnt work

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]