I have a new installation of Mandrake 7.1 (RedHat mostly) on my mobil, Siemens 510AGP and trying to get a PCMCIA Network adapter going (Psion GoldCard 56k + Ethernet, Cardbus) I am using the 2.2.15 kernel and the 3.1.19 PCMCIA package. Two problems: 1. After cold boot the system loads the core PCMCIA OK but not the card driver. checking the card with cardctl status show the card to be "busy", ejecting and inserting makes cardctl ident show: Socket 0: product info: "Psion", "10-100Mb MF CardBus", "400062-01C", "123456789abc" manfid: 0x016c, 0x0021 function: 6 (network) Socket 1: no product info available 2. But still no driver loaded as fas as I can see I have added the card as a "10-100Mb MF Cardbus" in the config file to bind it to pcnet_cs but no change There seems to be a failure of IRQ 9 in the log file which I have tried to exclude in the config.opts but no change Enclose is the dmesg, lsmod output any clues? Regards Jan dmesg = Linux version 2.2.15-4mdk (chmou@kenobi.mandrakesoft.com) (gcc version 2.95.3 19991030 (prerelease)) #1 Wed May 10 15:31:30 CEST 2000 Detected 267277459 Hz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 532.48 BogoMIPS Memory: 192660k/196608k available (1208k kernel code, 416k reserved, 2252k data, 72k init, 0k bigmem) Dentry hash table entries: 32768 (order 6, 256k) Buffer cache hash table entries: 262144 (order 8, 1024k) Page cache hash table entries: 65536 (order 6, 256k) VFS: Diskquotas version dquot_6.4.0 initialized CPU: Intel Pentium II (Deschutes) stepping 02 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au) PCI: PCI BIOS revision 2.10 entry at 0xf5200 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Enabling I/O for device 00:3a Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 262144 bhash 65536) Initializing RT netlink socket Starting kswapd v 1.5 Detected PS/2 Mouse Port. Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A pty: 256 Unix98 ptys configured apm: BIOS version 1.2 Flags 0x03 (Driver version 1.12) Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 4096K size Uniform Multi-Platform E-IDE driver Revision: 6.30 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfcd0-0xfcd7, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xfcd8-0xfcdf, BIOS settings: hdc:pio, hdd:pio hda: TOSHIBA MK1214GAP, ATA DISK drive hdc: TOSHIBA CD-ROM XM-1602B, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: TOSHIBA MK1214GAP, 11513MB w/0kB Cache, CHS=1467/255/63 hdc: ATAPI 20X CD-ROM drive, 128kB Cache Uniform CDROM driver Revision: 2.56 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 raid5: measuring checksumming speed raid5: MMX detected, trying high-speed MMX checksum routines pII_mmx : 589.407 MB/sec p5_mmx : 615.696 MB/sec 8regs : 477.774 MB/sec 32regs : 251.841 MB/sec using fastest function: p5_mmx (615.696 MB/sec) scsi : 0 hosts. scsi : detected total. md.c: sizeof(mdp_super_t) = 4096 Partition check: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > autodetecting RAID arrays autorun ... ... autorun DONE. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 72k freed Adding Swap: 136512k swap-space (priority -1) usb.c: registered new driver hub usb.c: registered new driver usb-storage USB Mass Storage support registered. usb.c: registered new driver keyboard cs89x0.c: Module autoprobing not allowed. cs89x0.c: Append io=0xNNN Linux PCMCIA Card Services 3.1.19 kernel build: 2.2.15-4mdk #1 Wed May 10 15:31:30 CEST 2000 options: [pci] [cardbus] [apm] PCI routing table version 1.0 at 0xf57d0 00:0a.0 -> irq 9 00:0a.1 -> irq 9 Intel PCIC probe: O2Micro OZ6832/33 rev 02 PCI-to-CardBus at slot 00:0a, mem 0x68000000 host opts [0]: [pci irq 9] [lat 168/176] [bus 32/34] host opts [1]: [pci irq 9] [lat 168/176] [bus 35/37] PCI irq 9 test failed ISA irqs (default) = 3,4,5,7,11,12 polling interval = 1000 ms cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x807 cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x378-0x37f 0x388-0x38f 0x398-0x39f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. IrDA (tm) Protocols for Linux-2.2 (Dag Brattli) cs: socket 0 timed out during reset usb-uhci.c: $Revision: 1.228 $ time 15:46:55 May 10 2000 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: Intel USB controller: setting latency timer to 0 usb-uhci.c: USB UHCI at I/O 0xfce0, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 usb.c: USB new device connect, assigned device number 1 hub.c: USB hub found hub.c: 2 ports detected cs: socket 0 timed out during reset unloading PCMCIA Card Services Linux PCMCIA Card Services 3.1.19 kernel build: 2.2.15-4mdk #1 Wed May 10 15:31:30 CEST 2000 options: [pci] [cardbus] [apm] PCI routing table version 1.0 at 0xf57d0 Intel PCIC probe: O2Micro OZ6832/33 rev 02 PCI-to-CardBus at slot 00:0a, mem 0x68000000 host opts [0]: [pci irq 9] [lat 168/176] [bus 32/34] host opts [1]: [pci irq 9] [lat 168/176] [bus 35/37] PCI irq 9 test failed ISA irqs (default) = 3,4,5,7,11 polling interval = 1000 ms cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x807 cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x378-0x37f 0x388-0x38f 0x398-0x39f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: cb_alloc(bus 32): vendor 0x10b8, device 0x0006 ROM image dump: image 0: 0x000000-0x000bff, signature PCIR epic100.c:v1.07h 8/18/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/epic100.html cs: cb_config(bus 32) cs: could not allocate 512 IO ports for CardBus socket 0 cs: cb_release(bus 32) epic_cb: RequestIO: Out of resource cs89x0.c: Module autoprobing not allowed. cs89x0.c: Append io=0xNNN lsmod = Module Size Used by serial_cb 1148 0 (unused) epic_cb 10440 0 (unused) cb_enabler 2536 2 [serial_cb epic_cb] ds 6440 2 [cb_enabler] i82365 22948 2 pcmcia_core 45856 0 [cb_enabler ds i82365] soundcore 3748 0 (autoclean) (unused) usb-uhci 26660 0 (unused) autofs 9604 1 (autoclean) irda 84289 1 nls_iso8859-1 2276 4 (autoclean) nls_cp437 3784 4 (autoclean) vfat 11164 4 (autoclean) fat 32864 4 (autoclean) [vfat] keybdev 1832 0 (unused) usbkbd 2292 0 (unused) input 2880 0 [keybdev usbkbd] usb-storage 10120 0 (unused) usbcore 27236 0 [usb-uhci usbkbd usb-storage] supermount 15112 2 (autoclean) |
Messages