Ok: Ethernet working using 3.1.20 release, still some minor problems 

Forum: PCMCIA Network Adapter Issues
Re: Question: Psion GoldCard Cardbus Network adapter problem with Mandrake 7.1 (Jan Calmered)
Re: IO port allocation problem (David Hinds)
Re: Feedback: Thanks, allocating more IO helped (Jan Calmered)
Re: Question: To quick to be happy, seems to have some IRQ problem still (Jan Calmered)
Re: Try some other irq_mode values (David Hinds)
Re: Tried irq_mode=3 and got it to stop complaining about IRQ9 but still not OK (Jan Calmered)
Re: Several issues (David Hinds)
Date: 2000, Aug 17
From: Jan Calmered <jan.calmered@sbs.siemens.se>

Thanks for your help Yes, the irq_mode=3 was the only one working, tried all you suggested. Also removed the mention of cs89x0 in conf.modules, no complaints about autoprobing now Downloaded the pcmcia release 3.1.20 from 11th of August and installed, got the ehternet to work OK, the problem remaining is that I still get the card to be busy after a reboot, removing the card, stopping pcmcia services, restarting pcmcia services, inserting card usually gets it to work OK but once the card is working I seem to have good performance and no other issues. Regards Jan

[ Next-in-Thread ]  [ Next Message ] 

[ Add Message ]  to: "Ethernet working using 3.1.20 release, still some minor problems"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]