Greetings,
System: Acer Extensa 710TE
PCcard: D-Link DFE-650
[Setup: Works without a hitch under Win98]
Kernel: 2.2.14 #1 Mon Mar 13 10:54:26 GMT 2000 (Suse 6.4)
Driver: cardctl version 3.1.19
No changes to /etc/pcmcia or other startup scripts.
Startup (/var/log/messages):
Aug 22 11:10:32 wcra kernel: Linux PCMCIA Card Services 3.1.19
Aug 22 11:10:32 wcra kernel: kernel build: 2.2.14 #1 Mon Mar 13 10:54:26 GMT 2000
Aug 22 11:10:32 wcra kernel: options: [pci] [cardbus] [apm] [pnp]
Aug 22 11:10:32 wcra kernel: PCI routing table version 1.0 at 0xfdf60
Aug 22 11:10:32 wcra kernel: 00:06.0 -> irq 11
Aug 22 11:10:32 wcra kernel: 00:06.1 -> irq 11
Aug 22 11:10:32 wcra kernel: PnP: PNP BIOS installation structure at 0xc00f77b0
Aug 22 11:10:32 wcra kernel: PnP: PNP BIOS version 1.0, entry at f0000:a515, dseg at 400
Aug 22 11:10:32 wcra kernel: Intel PCIC probe:
Aug 22 11:10:32 wcra kernel: TI 1250A rev 02 PCI-to-CardBus at slot 00:06, mem 0x68000000
Aug 22 11:10:32 wcra kernel: host opts [0]: [pci + serial irq] [pci irq 11] [lat 168/176] [bus 32/34]
Aug 22 11:10:32 wcra kernel: host opts [1]: [pci + serial irq] [pci irq 11] [lat 168/176] [bus 35/37]
Aug 22 11:10:32 wcra kernel: ISA irqs (scanned) = 9,10 PCI status changes
Aug 22 11:10:32 wcra kernel: cs: IO port probe 0x0c00-0x0cff: clean.
Aug 22 11:10:32 wcra kernel: cs: IO port probe 0x0800-0x08ff: clean.
Aug 22 11:10:32 wcra kernel: cs: IO port probe 0x0100-0x04ff: clean.
Aug 22 11:10:32 wcra kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Aug 22 11:10:32 wcra kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
Aug 22 11:10:32 wcra kernel: eth0: NE2000 (DL10022 rev 30): io 0x300, irq 9, hw_addr 00:E0:98:77:54:FD
Operating info:
bash-2.03# lsmod
Module Size Used by
usb-uhci 17000 0 (unused)
pcnet_cs 10636 0 (unused)
8390 6228 0 [pcnet_cs]
ds 6632 2 [pcnet_cs]
i82365 23392 2
pcmcia_core 52672 0 [pcnet_cs ds i82365]
serial 42612 1 (autoclean)
memstat 1476 0 (unused)
usbcore 42344 1 [usb-uhci]
bash-2.03# cardctl config
Socket 0:
not configured
Socket 1:
Vcc 5.0V Vpp1 0.0V Vpp2 0.0V
interface type is "memory and I/O"
irq 9 [exclusive] [level]
function 0:
config base 0x0400
option 0x60 status 0x00 copy 0x00
io 0x0300-0x031f [auto]
bash-2.03# cardctl ident
Socket 0:
no product info available
Socket 1:
product info: "D-Link", "DFE-650", "Fast Ethernet", "Rev. D1"
manfid: 0x0149, 0x0230
function: 6 (network)
This is the *correct* identity.
But no access to the network (ping <server>).
Cardinfo gives a warning; then all fields are blank:
bash-2.03# cardinfo
Card Services release does not match!
Resetting the card controller:
bash-2.03# cardctl suspend
bash-2.03# cardctl reset
... generates these /var/log/messages:
Aug 22 11:37:16 wcra cardmgr[80]: executing: './network suspend eth0'
Aug 22 11:37:32 wcra cardmgr[80]: shutting down socket 1
Aug 22 11:37:32 wcra cardmgr[80]: executing: './network stop eth0'
Aug 22 11:37:32 wcra cardmgr[80]: executing: 'modprobe -r pcnet_cs'
Aug 22 11:37:32 wcra cardmgr[80]: executing: 'modprobe -r 8390'
Aug 22 11:37:32 wcra cardmgr[80]: initializing socket 1
Aug 22 11:37:32 wcra cardmgr[80]: socket 1: KTI ETHER-C16 Fast ethernet
Aug 22 11:37:33 wcra cardmgr[80]: executing: 'modprobe 8390'
Aug 22 11:37:33 wcra cardmgr[80]: executing: 'modprobe pcnet_cs'
Aug 22 11:37:33 wcra kernel: eth0: NE2000 (DL10022 rev 30): io 0x300, irq 9, hw_addr 00:E0:98:77:54:FD
Aug 22 11:37:33 wcra cardmgr[80]: executing: './network start eth0'
So it seems the 'KTI ETHER-C-16' driver is installed,
but cardctl still thinks its the 'D-Link':
bash-2.03# date
Tue Aug 22 11:44:38 CEST 2000
bash-2.03# cardctl ident
Socket 0:
no product info available
Socket 1:
product info: "D-Link", "DFE-650", "Fast Ethernet", "Rev. D1"
manfid: 0x0149, 0x0230
function: 6 (network)
Thanks in advance for any suggestions.
Regards,
William BC Crandall
Wiesbaden . Germany
wcra@beest.midat.de and/or
crandall@wiesbaden.vistec.net
|
Messages