Question: Compex Linkport/TX32 and EEPROM 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Aug 26
From: Marco Dubbeld marco

When I insert my Linkport TX32 card cardmgr reports in messages: cardmgr[9623]: initializing socket 0 cardmgr[9623]: socket 0: Compex LinkPort/TX32A kernel: cs: cb_alloc(bus 32): vendor 0x10ec, device 0x8138 cardmgr[9623]: executing: 'modprobe cb_enabler' cardmgr[9623]: executing: 'modprobe tulip_cb 10baseT debu kernel: fn 0 bar 1: io 0xa00-0xaff kernel: fn 0 bar 2: mem 0x60001000-0x600011ff kernel: irq 11 kernel: tulip_attach(device 20:00.0) kernel: tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasord) kernel: eth0: Digital DS21143 Tulip rev 16 at 0xa00, EEPROM not present, 00:4C:69:6E:75:79, IRQ 11. kernel: eth0: Missing EEPROM, this interface may not work correctly! cardmgr[9623]: executing: './network start eth0' kernel: eth0: Tx hung, 11 vs. 0. kernel: eth0: 21140 transmit timed out, status 0801fbfc, SIA 0000000f 00000000 00000018 58fab388, resetting... And then the interface doesn't work. What can I do? Thanks.

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. "Tx Hung" often means an interrupt delivery problem by David Hinds, 2000, Aug 28

(_ more info Compex TX32, "Tx hung" problem by Marco Dubbeld, 2000, Aug 29

(_ Wait a second: this is not the right driver! by David Hinds, 2000, Sep 01

[ Add Message ]  to: "Compex Linkport/TX32 and EEPROM"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]