[ Next-in-Thread ]  [ Next Message ] 

Wait a second: this is not the right driver! 

Forum: PCMCIA Network Adapter Issues
Re: Question: Compex Linkport/TX32 and EEPROM (Marco Dubbeld)
Re: "Tx Hung" often means an interrupt delivery problem (David Hinds)
Re: more info Compex TX32, "Tx hung" problem (Marco Dubbeld)
Date: 2000, Sep 01
From: David Hinds <dhinds@pcmcia.sourceforge.org> 

You didn't mention the part about how this was reported as an
"unsupported card" until you added it to /etc/pcmcia/config ;)

This card is not compatible with the tulip_cb driver.

>   Bus 32, device   0, function  0:
>     Ethernet controller: Realtek Unknown device (rev 16).
>       Vendor id=10ec. Device id=8138.

You can get a Realtek CardBus driver from http://www.scyld.com but I
have not tested it.

-- Dave

[ Next-in-Thread ]  [ Next Message ] 

[ Add Message ]  to: "Wait a second: this is not the right driver!"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]