messages for compaqua armada 1750 

Forum: PCMCIA Network Adapter Issues
Re: Question: dynalink lc10 network can't initialise
Re: The actual messages would help (David Hinds)
Date: 1999, Nov 30
From: digit

Nov 30 10:27:41 localhost pcmcia: Starting PCMCIA services: Nov 30 10:27:41 localhost pcmcia: modules Nov 30 10:27:41 localhost kernel: Linux PCMCIA Card Services 3.0.14 Nov 30 10:27:41 localhost kernel: kernel build: 2.2.12-20 #1 Mon Sep 27 10:40: 35 EDT 1999 Nov 30 10:27:41 localhost kernel: options: [pci] [cardbus] [apm] Nov 30 10:27:41 localhost kernel: Intel PCIC probe: Nov 30 10:27:41 localhost kernel: TI 1225 PCI-to-CardBus at bus 0 slot 17, mem 0x7fffe000, 2 sockets Nov 30 10:27:41 localhost kernel: host opts [0]: [ring] [pwr save] [pci + se rial irq] [no pci irq] [lat 66/176] [bus 2/2] Nov 30 10:27:41 localhost kernel: host opts [1]: [ring] [pwr save] [pci + se rial irq] [no pci irq] [lat 66/176] [bus 3/3] Nov 30 10:27:41 localhost kernel: ISA irqs (scanned) = 3,4,7,9,10,15 status change on irq 15 Nov 30 10:27:41 localhost pcmcia: cardmgr. Nov 30 10:27:41 localhost cardmgr[412]: starting, version is 3.0.14 Nov 30 10:27:41 localhost cardmgr[412]: watching 2 sockets Nov 30 10:27:41 localhost kernel: cs: IO port probe 0x1000-0x17ff: excluding 0x1 000-0x10ff Nov 30 10:27:41 localhost kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x1 00-0x107 0x220-0x22f 0x250-0x257 0x330-0x337 0x378-0x37f 0x388-0x38f 0x4d0-0x4d7 Nov 30 10:27:41 localhost cardmgr[412]: initializing socket 0 Nov 30 10:27:41 localhost kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. Nov 30 10:27:41 localhost cardmgr[412]: socket 0: DynaLink L10C Ethernet Nov 30 10:27:41 localhost rc: Starting pcmcia succeeded Nov 30 10:27:41 localhost cardmgr[412]: executing: 'insmod /lib/modules/2.2.12-2 0/net/8390.o' Nov 30 10:27:41 localhost cardmgr[412]: executing: 'insmod /lib/modules/2.2.12-2 0/pcmcia/pcnet_cs.o' Nov 30 10:27:42 localhost kernel: eth0: NE2000 Compatible: io 0x300, irq 3, hw_a ddr 00:C0:0C:03:9D:3D Nov 30 10:27:42 localhost cardmgr[412]: executing: './network start eth0' Nov 30 10:27:42 localhost inet: inetd startup succeeded Nov 30 10:27:42 localhost cardmgr[412]: + usage: ifup <device name> Nov 30 10:27:42 localhost cardmgr[412]: start cmd exited with status 1

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ 1 ] 

No real problems here Re: messages for compaqua armada 1750 Date: 1999, Nov 30 From: David Hinds <dhinds@pcmcia.sourceforge.org>

> Nov 30 10:27:42 localhost cardmgr[412]: + usage: ifup <device name> Run "netconf" and enter some settings for your network. Everything else looks perfect. -- Dave

Thanks!! Re: No real problems here (David Hinds) Date: 1999, Dec 01 From: digit

Wow it works now, made an eth0 device with no kernel module and no boot start. Finally. I got confused because I entered IP netmask etc. in network.opts under RH6.1 in /etc/pcmcia/ This realy makes my millenium!! uhmmm thanks!

[ Add Message ]  to: "messages for compaqua armada 1750"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]