Next-in-Thread Next Message

Feedback Addition to pcmcia/config file required. 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Aug 27
From: Rudi Heitbaum rudi

Addition to the config file to enable the EtherExpress PrO/100 Lan+Modem56 CardBus II.

card "Intel EtherExpress PRO/100 Lan+Modem56 CardBus II"
  manfid 0x0089, 0x1103
  bind "eepro100_cb" to 0, "serial_cb" to 1

The other thing I found is if minicom is set to use hardware flow control the laptop hangs.

/sbin/cardctl ident 
  product info: "INTEL(R)", "PRO/100 LAN+MODEM56 CARDBUS II", "MBLA3456", "1.00"  manfid: 0x0089, 0x1103

Regards

Rudi

Next-in-Thread Next Message

Select this message: Addition to pcmcia/config file required.

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]