[ Next-in-Thread ]  [ Next Message ] 

Feedback: Addition to pcmcia/config file required. 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Aug 27
From: Rudi Heitbaum rudi

Addition to the config file to enable the EtherExpress PrO/100 Lan+Modem56 CardBus II. 

card "Intel EtherExpress PRO/100 Lan+Modem56 CardBus II"
  manfid 0x0089, 0x1103
  bind "eepro100_cb" to 0, "serial_cb" to 1

The other thing I found is if minicom is set to use hardware flow control the laptop hangs. 

/sbin/cardctl ident 
  product info: "INTEL(R)", "PRO/100 LAN+MODEM56 CARDBUS II", "MBLA3456", "1.00"  manfid: 0x0089, 0x1103

Regards

Rudi

[ Next-in-Thread ]  [ Next Message ] 

[ Add Message ]  to: "Addition to pcmcia/config file required."

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]