Next-in-Thread Next Message

Question DFE-650 only 10 Mbit? 

Forum: PCMCIA Network Adapter Issues
Date: 1999, Nov 29
From: tma

Hello, i have a rather strange problem with a D-LINK DFE-650 100TX card on an ACER Travelmate 332T.. the card itself works pretty good, but the maximum speed is ~ 1.18 mb/sec, which is exactly 10Mbit. the network/connection is about 6-8 mb/sec with win98 (spit!) using the same machine/card, so the problem seems to be the driver.. the faq lists this card as 10/100 & working, so i'm optimistic

dump of dmesg: (oh yes, and it's a somehow modified slackware 7.0)

Linux version 2.2.13 (root@flap) (gcc version 2.95.1 19990816 (release)) #2 Mon Nov 29 21:47:13 CET 1999
Detected 365819234 Hz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 365.36 BogoMIPS
Memory: 62908k/65472k available (1060k kernel code, 412k reserved, 1024k data, 68k init)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Mobile Pentium II stepping 0a
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xf0200
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5 
vesafb: framebuffer at 0x80800000, mapped to 0xc4000000, size 2560k
vesafb: mode is 800x600x8, linelength=800, pages=4
vesafb: protected mode interface info at c000:687c
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS02 at 0x03e8 (irq = 4) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x0f (Driver version 1.9)
Real Time Clock Driver v1.09
Uniform Multi-Platform E-IDE driver Revision: 6.20
ALI15X3: IDE controller on PCI bus 00 dev 78
ALI15X3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x7090-0x7097, BIOS settings: hda:DMA, hdb:pio
ALI15X3: simplex device:  DMA disabled
ide1: ALI15X3 Bus-Master DMA disabled (BIOS)
hda: IBM-DBCA-206480, ATA DISK drive
ide2: ports already in use, skipping probe
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ALI15X3: Ultra DMA enabled
hda: IBM-DBCA-206480, 6194MB w/420kB Cache, CHS=789/255/63, UDMA(33)
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Partition check:
 hda: hda1 hda2 < hda5 hda6 > hda3
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 68k freed
Adding Swap: 104384k swap-space (priority -1)
parport0: PC-style at 0x378 [SPP,PS2,EPP]
lp0: using parport0 (polling).
CSLIP: code copyright 1989 Regents of the University of California
PPP: version 2.3.7 (demand dialling)
PPP line discipline registered.
PPP BSD Compression module registered
Linux PCMCIA Card Services 3.1.5
  kernel build: 2.2.13 #1 Mon Nov 29 21:17:51 CET 1999
  options:  [pci] [cardbus] [apm]
Intel PCIC probe: 
  O2Micro OZ6812 PCI-to-CardBus at bus 0 slot 19, mem 0x68000000, 1 socket
    host opts [0]: [a 24] [b 0d] [c 00] [d 83] [mhpg 18] [fifo 00] [e 2a] [no pci irq] [lat 32/176] [bus 32/34]
    ISA irqs (default) = 3,4,7,11,12 polling interval = 1000 ms
cs: IO port probe 0x1000-0x17ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:E0:98:73:A0:75
eth0: found link beat

thanks in advance, tma

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None I don't really know by David Hinds, 1999, Nov 30
(_ Question right. by tma@ppmedia.at, 1999, Nov 30
(_ None Re: Question: right. by David Hinds, 1999, Nov 30

Add Message to: "DFE-650 only 10 Mbit?"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10