[ Next-in-Thread ]  [ Next Message ] 

I don't really know 

Forum: PCMCIA Network Adapter Issues
Re: Question: DFE-650 only 10 Mbit?
Date: 1999, Nov 30
From: David Hinds <dhinds@pcmcia.sourceforge.org>

I have no additional information for you.  With this card, I get about
the same throughput you do.  The card definitely does negotiate a
100baseT connection; a conventional NE2000 type card could not reach
this speed on a 10baseT link.  I had assumed that the card was doing
some sort of internal throttling, since it could never keep up with a
100baseT link anyway.

However, it is (as far as I know) not possible that you could get 6-8
mb/sec under windows with this card.  The maximum transfer rate for
the 16-bit PCMCIA bus is only about 2 mb/sec, and it is not possible
to do better than that without going to a CardBus card.

-- Dave

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

Question: right.

Re: I don't really know (David Hinds)
Date: 1999, Nov 30
From: tma

reinstalled 98, does really just ~1,3 mb/sec.. lesson learned, never believe anything you haven't tested yourself..damn.

1.) D-Link DFE-660TX and 2.) SURECOM EP-428X

are both CardBus. do you know if they work smooth & fast, especially the 428X ?

thanks, tma

1. Re: Question: right. by David Hinds, 1999, Nov 30
I don't really know


[ Add Message ]  to: "I don't really know"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]