[ Next-in-Thread ]  [ Next Message ] 

Question: LinkSys 10baseT "Network Everywhere" NP10T? 

Forum: PCMCIA Network Adapter Issues
Date: 1999, Dec 01
From: John Tunison jtunison

Hi,

I was wondering if anybody's been able to get the LinkSys 10baseT "Network Everywhere" card to work. I know it's not on the supported cards list, but it said on the box "NE2000 compatible" and it only cost $35 at CompUSA, so I thought I'd try it. (Also, I knew that LinkSys had a Linux driver page on their website. Unfortunately, it has no mention fo the Network Everywhere PC card.)

Everything appears to load correctly, but the card won't actually work. I'm _pretty_ sure I've got my ethernet settings confingured correctly.

The card seems to be detected properly:

localhost kernel: eth0: NE2000 Compatible: port 0x300, irq 5, hw_addr 00:E0:98:70:4C:8C

Any suggestions?

Thanks, -John

[ Next-in-Thread ]  [ Next Message ] 

Select this message: LinkSys 10baseT "Network Everywhere" NP10T?

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Feedback: More info... by John Tunison, 1999, Dec 06
(_ There isn't much you can do to fix install problems by David Hinds, 1999, Dec 14
(_ Ok: For others with a Vaio N505... by John Tunison, 1999, Dec 14

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]