Next-in-Thread Next Message

Feedback More info... 

Forum: PCMCIA Network Adapter Issues
Re: Question LinkSys 10baseT "Network Everywhere" NP10T? (John Tunison)
Date: 1999, Dec 06
From: John Tunison jtunison

When I try installing from RH 6.1 pcmcia.img (the updated version), and I select NFS install and then look at alt-f4, I see this:

<6>eth0: NE2000 Compatible: io 0x300, irq5, hw_addr ...
<30> ... cardmgr[14]: fopen(stabfile) failed:  No such file or directory
<30> ... cardmgr[14]: exiting
<7>eth0: Tx timed out, lost interrupt?  TSR=0x3, ISR=0x3, t=1000.
<7>eth0: Tx timed out, lost interrupt?  TSR=0x3, ISR=0x3, t=1500.

Please tell me there's something I can do to make this card work. (This is on a Sony Vaio n505ve.)

Thanks, John

Next-in-Thread Next Message

Select this message: More info...

Messages Inline: 1 All Outline: 1 2 All

1. None There isn't much you can do to fix install problems by David Hinds, 1999, Dec 14
(_ Ok For others with a Vaio N505... by John Tunison, 1999, Dec 14

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]